Holden Calais 1986

FROM

$2,420

The 1986 Holden Calais range of configurations is currently priced from $2,420.

The 1986 Holden Calais carries a braked towing capacity of up to 1590 Kg, but check to ensure this applies to the configuration you're considering.

11.0L/100km (combined)

Sedan

4 Speed Automatic

Unleaded Petrol

Holden Calais Model	Body Type	Front Tyre Size	Front Rim	Rear Rim
	Body Type: Sedan	Front Tyre Size: —	Front Rim: 6x15 in	Rear Rim: 6x15 in

Holden Calais Model

Body Type

Front Tyre Size

Front Rim

Rear Rim

Holden Calais Model	Body Type	Specs	Price from	Price to
	Body Type: Sedan	Specs: 5.0L ULP 3 SP AUTO	Price From: $2,420	Price To: $4,180

Holden Calais Model

Body Type

Specs

Price from

Price to

Body Type: Sedan

Specs: 5.0L ULP 3 SP AUTO

Price From: $2,420

Price To: $4,180

Holden Calais 1986 Dimensions

Dimensions for the 1986 Holden Calais are dependent on which body type is chosen. The maximum width and height is 1722mm x 1360mm and can vary on the basis of model.

Holden Calais Model	Body Type	Height x Width x Length	Ground Clearance
	Body Type: Sedan	Height x Width x Length: 1360x1722x4714 mm	Ground Clearance: 150 mm

See all Holden Calais 1986 Dimensions

Holden Calais 1986 Fuel consumption

Fuel consumption for the 1986 Holden Calais is dependent on the type of engine, transmission, or model chosen. The Holden Calais currently offers fuel consumption from 14.0L/100km.

Body Type	Specs	Fuel Consumption
Body Type: Sedan	Specs: 3.3L Leaded 3 SP AUTO	Fuel Consumption: 14.0L/100km
Body Type: Sedan	Specs: 5.0L Leaded 4 SP MAN	Fuel Consumption: 19.0L/100km
Body Type: Sedan	Specs: 5.0L Leaded 3 SP AUTO	Fuel Consumption: 17.0L/100km
Body Type: Sedan	Specs: 3.0L ULP 4 SP AUTO	Fuel Consumption: 11.0L/100km
Body Type: Sedan	Specs: 3.0L ULP 5 SP MAN	Fuel Consumption: 13.0L/100km
Body Type: Sedan	Specs: 3.0L ULP 4 SP AUTO	Fuel Consumption: 12.5L/100km
Body Type: Sedan	Specs: 5.0L ULP 3 SP AUTO	Fuel Consumption: 16.0L/100km

See all Holden Calais 1986 Pricing & Specs

Holden Calais 1986 FAQs

Calais concerns

THE VL was powered by a Nissan straight six, not a V6. There is a problem with the cooling system of the Commodore, but it's caused by the installation of the engine, not the engine itself. Because of installation compromises in the Commodore, the Nissan engine is difficult to refill with coolant after being drained. If it isn't correctly refilled, the system can be low on coolant and the engine will overheat. A bleed valve on the top of the engine needs to be opened so coolant can flow out when the system is full. If it's refilled correctly, you won't have any problems.

Don't diy

I wouldn't recommend fitting a catalytic converter as I doubt you could get it working. There's a lot more to fitting a converter than installing it in the exhaust system. Making it work effectively is a development exercise in itself, and one I would suggest isn't worth attempting. At least you know that by running unleaded in your car you're not pumping lead into the atmosphere.

See all Holden Calais 1986 FAQs

Disclaimer: You acknowledge and agree that all answers are provided as a general guide only and should not be relied upon as bespoke advice. CarsGuide is not liable for the accuracy of any information provided in the answers.

Holden Calais 1986 VS The Competition

See all Holden Calais Comparisons

Holden Calais 1986 Towing Capacity

The 1986 Holden Calais has maximum towing capacity of 1590kg. Some models also offer heavy-duty or towing option packs which can increase towing capacity, as well as options which can hamper towing capacity. Towing capacities can vary wildly on a large number of factors. These include engine, transmission, model, and options chosen. Always check with the manufacturer or in your vehicles handbook before attempting to tow anything.