Our test vehicle’s 1796kg kerb weight is relatively light, which when deducted from its 3100kg GVM leaves a substantial 1304kg payload rating of which up to 170kg can be carried on the roof.
However, in stark contrast the Scudo is only rated to tow up to 600kg, which is below the 750kg threshold for mandatory trailer brakes. And Fiat does not publish a GCM rating (how much it can legally carry and tow at the same time) so we don’t know if the Scudo can carry its maximum payload while towing its maximum trailer weight.
In practical terms this tow rating would restrict users to the smallest and lightest box trailers to leave enough capacity for a decent load, which could be a deal breaker for those who need to tow heavier weights.
The cargo bay, which in LWB form provides a competitive 6.1 cubic metres of load volume, can be increased to 6.6 cubic metres by opening the large load-through flap at the lower left of the cabin bulkhead and raising the outer passenger seat’s base cushion into its vertical position.
This extends the load floor to an expansive 4024mm which allows extra-long items like timber, electrical conduit, copper/PVC pipe, carpet roles etc to slide through to the passenger footwell, which greatly increases practicality.
For example, we used this handy feature to transport several 3.6-metre wooden posts from a hardware store (see images) which would have been too long for the standard floor, so it was a convenient solution.
Our only criticism of this feature is that the flap is hinged at its base which means when opened it lies flat on the floor, which makes it more vulnerable to load damage than a top-hinged flap (like the Renault Trafic) which opens upwards and therefore out of harm’s way.
The LWB cargo bay’s load floor is 2862mm long (without using the bulkhead flap) and 1628mm wide with 1397mm from floor to roof. There’s also 1258mm between the rear wheel housings, which means it can carry up to two standard Aussie pallets or up to three Euro pallets, secured by a choice of eight load anchorage points.
The cargo bay is accessed through solid sliding doors on each side and glazed twin barn-doors at the rear (a glazed rear liftgate is available as a $700 option). The barn-doors can swing open to 270 degrees to optimise forklift and loading dock access but there are no detents in the hinges or other stays to hold them open, so they can easily swing shut in a light breeze or if parked on an incline.
There’s no standard floor protection which makes it prone to load damage but the cargo bay walls are neatly lined to mid-height plus there’s ample lighting and a handy 12V socket.
Although it can seat up to three occupants, centre seat comfort is compromised by the large dash protrusion housing the gear selector. This forces the central passenger to sit with knees skewed to the left, which also encroaches on the outer passenger’s legroom. So, a crew of three is okay for short trips but ideally should be capped at two for longer journeys.
Cabin storage includes bins in the base of each door which are big enough to carry large bottles. The dash provides cupholders on each side and a clamshell-lidded compartment in the centre plus a glove box and adjoining open storage compartment.
The Primo’s centre console has wireless phone charging in addition to the standard 12V socket and pair of USB-C ports. The centre seat backrest also folds forward to reveal a handy work desk and under its base cushion is an insulated compartment lined in polystyrene foam to help keep food and drinks hot or cold.
.png)
.png)
.png)
.jpg){kind=small}
