Kia Sorento 2007

Kia Sorento 2007 Q&As

Check out real-world situations relating to the Kia Sorento here, particularly what our experts have to say about them.

• What's a good hybrid car to buy?

  The default purchase for somebody looking for a mid-sized hybrid SUV is the Toyota RAV4 Hybrid. But if that’s too big, there’s the Toyota Yaris Cross Hybrid, C-HR Hybrid and even the Corolla Cross Hybrid which sounds like the marketplace is getting crowded but is really just a reflection of the appetite right now for cars like these. And that’s the catch; the waiting times for a brand-new example of some of these cars is out to many months and even years. So your plan to shop second-hand makes plenty of sense, but don’t expect any bargains in a market currently being dominated by lots of demand and less supply.

  Beyond the Toyota brand (which has been doing hybrids longer than just about anybody else) there’s also the Mazda CX-30, Subaru XV Hybrid, Haval Jolion Hybrid, Kia Niro, Subaru Forester Hybrid, Nissan Qashqai e-Power, MG HS, Honda HR-V e and more. For something a bit bigger, try the Kia Sorento or Hyundai Santa Fe hybrids. There are others out there, too, that are probably bigger or more expensive than you need, but it's very much a growing scene in the Australian marketplace.

  Show more Show less
• With only 120,000km on the clock should Kia honour its warranty as compressors should never fail this early?

  There are two issues here. The first is that an air-conditioning compressor should not, according to your repair person, stop working at 120,000km. That’s probably debatable and would also be a function of how frequently the air-conditioning runs in your car.

  The second issue is that, from the way you’ve described it, this happened within days of the factory warranty expiring. At that point, I think you’d be within your rights to contact Kia’s customer service department and have a chat about the timing of this failure. There are no guarantees here, but it’s possible that Kia might offer some pro-rata assistance with the cost of repairs or parts, given the fault occurred just outside the warranty period. Some companies will do this in some cases as an act of goodwill, but don’t go to the bank on it.

  Show more Show less
• Why does my 2009 Kia Sorento Intermittently go into limp home mode?

  Before you do anything, take the car to a workshop with the correct diagnostic gear and have it scanned. This process will see the workshop’s computer have a deep and meaningful conversation with the computer in your car, and the result will probably be a fault code(s) that will tell the mechanic exactly what’s going wrong.

  Beyond that, you’re merely stabbing in the dark, as limp-home mode can be triggered for all sorts of reasons including dud sensors, poor wiring, a computer glitch, you name it. The fact that it’s an intermittent limp-home situation makes it even harder to diagnose without a computer scan. You cans start to replace components at random to see if they fix the problem, but you’ll probably wind up replacing a whole heap of perfectly working ones before you stumble on to the one that’s playing up. In the meantime, you’ll have spent heaps and wasted weeks.

  Show more Show less
• How do you remove a rear door panel on a 2016 Kia Sorento?

  The first piece of advice would be to obtain a workshop manual for your car. Within those pages, you’ll find all sorts of valuable information and tips on performing home maintenance. Compared with even the briefest trip to a professional workshop, a good workshop manual will pay for itself over and over again.

  As for the rear door panel on your Sorento, the tricky part is finding all the hidden screws and fasteners that locate things like the armrest. Sometimes the attaching screws are hidden in tiny pop-out panels under the armrest, some times the screw will be hiding under a rubber insert in the door handle’s recess. These will usually be Philips-head screws.

  Once you’ve removed those screws, it comes down to a gentle game of popping each of the clips that secure the perimeter of the door panel to the actual door. You’ll gain a feel for this job, but be careful; if you’re too aggressive, you might break or snap the little plastic clips which would then need to be replaced before you could re-fit the door panel. A steady but firm force on the door panel, rather than a sudden shock is the best way to achieve this without damaging anything. Once all those clips have been freed, you should find that the whole door panel will be resting on a groove at the bottom of the window. Lift the panel clear of this and you’re done, although watch out for electrical wires that could still be attached to the power windows and courtesy lights.

  Show more Show less