Mazda BT-50 FAQs
2008 Mazda BT-50 overheating
This is a really common problem with this model (and the Ford Ranger with which it shared its mechanicals). Many buyers avoid this model for this very reason. Even though many fixes have been tried it seems that this car, shown a hill and a hot day, will often overheat.
Several theories exist including that the EGR valve is the problem, as it fails and allows coolant to escape (usually into the engine cylinders). But even when the EGR valve is working properly, this engine is prone to running too hot. Some other theories hold that the thermal management of the engine itself was just underdone and there’s no real fix for it. That’s borne out by the number of people who have tried different radiators, thermostats and cooling fans and still have a vehicle that overheats.
But you could try reverse flushing the radiator and making sure than every part of the cooling system is working efficiently and properly. That will maximise your chances of not having the engine overheat but, in this case, there are no promises.
Show more
Are the front drive shafts and CV joints of the 2021 Mazda BT-50 interchangeable with the Isuzu D-max?
If we’re talking about the current model D-Max and BT-50, then yes, the entire driveline should be interchangeable. Under the skin, both the Mazda and Isuzu utes are the same vehicle. Car makers enter into joint ventures like the development of this pair of vehicles to keep costs down by sharing the expense of developing, engineering and testing parts like engines, transmissions and, of course, drive-shafts and CV joints.
While most joint ventures like this one will arrive at two vehicles with some visual differences and usually some details differences inside, when it comes to the oily bits, making specific driveline or suspension parts for one vehicle over the other is defeating the purpose of the joint venture in the first place.
Show more
What's wrong with my seatbelt?
It’s unclear from the information you have given us just what the problem is, but I can make a guess that the belt is not tightening around you when you put it on. Whatever the problem take it to your Mazda dealer and have it checked, it could be a fault with the retractor; it could be a problem with the webbing.
Show more
Disclaimer: You acknowledge and agree that all answers are provided as a general guide only and should not be relied upon as bespoke advice. CarsGuide is not liable for the accuracy of any information provided in the answers.
*
Price is the median price of 51 listings for the BT-50 2008 for sale in the last 6 months.
The Price excludes costs such as stamp duty, other government charges and options.
Disclaimer: Glass's Information Services (GIS) and CarsGuide Autotrader Media
Solutions Pty Ltd. (CarsGuide) provide this information based on data from a range of sources
including third parties.
Whilst all care has been taken to ensure its accuracy and reliability, GIS and CarsGuide do not
warrant or represent that the information is accurate, reliable, complete, current or suitable for
any particular purpose.
You should not use or rely upon this information without conducting an independent assessment and
valuation of the vehicle.
To the maximum extent permitted by law, GIS and CarsGuide exclude all liability
for any direct, indirect, special or incidental loss, damage, expense or injury resulting from,
arising out of, or in connection with your use of or reliance upon this information.
