This light is properly called the Malfunction Indicator Light, so it’s kind of like a check-engine light. It’s telling you there’s something not right somewhere on the car and that you need to scan the car to get a more focussed idea of what the problem is.

The message is not to try to cancel the light and ignore it, because it could be being triggered by something you need to attend to promptly before further damage is done.

Most workshops will have a code-reader that plugs into the car and talks to the car’s computer to learn exactly what the root cause of this problem is. In many cases on a Jeep, the MIL will be triggered by a problem with the fuel and/or emissions system, typically a dud oxygen sensor, a loose fuel cap or even a tiny leak in the fuel system.

Once the technician has checked what fault codes are present, they can usually use the same code reader to cancel the MIL.

Most of the references I can find regarding the 20-14 Jeep Compass with the 2.0-litre petrol engine suggest that it requires premium unleaded fuel with an octane rating of at least 95 RON. Given that the engine has a fairly high compression ratio (one of the factors for requiring PULP) of 10.5:1, that’s not really a surprise even if the output of 115kW doesn’t suggest a highly tuned engine. I’d be inclined to take the Jeep dealer’s advice and use premium fuel. Engines tuned for PULP can suffer internal damage if they’re run on an inferior grade of fuel.

The other question is why there is a discrepancy between the handbook and the dealership. The advice to Compass owners in the US is to use low-octane fuel (as low as 87 RON) where possible. This is possibly because the engine uses a different state of tune on the US market. One guess, therefore, is that while the Australian version of the Jeep requires PULP, the handbook hasn’t been changed from the US version to reflect this.

The Hyundai is a clear winner for me and gets The Tick. I get lots of emails from unhappy Jeep owners.