2010 Holden Cruze Pricing and Specs

It could be the fuel filter that’s allowing the car to start, then not allowing enough fuel past to keep the engine running. But, equally, it could be a failing fuel pump or fuel pressure regulator that’s causing the issue. Even an air (vacuum) leak somewhere in the intake system can cause problems like this one.

You may even find the problem is electrical and once the engine has run for a short time, something like a sensor is getting hot enough to shut things down. An electronic scan of the vehicle at a workshop would likely throw some useful light on what’s going on, including a check of the fuel system’s operating pressure and its delivery rate.

I can only hope so. Trying to start an engine with an obvious and large fuel leak like the one you’ve described is really tempting fate. This leak needs to be fixed before attempting to start or drive the vehicle as it’s a major fire hazard.

Even turning on the ignition will have the pump spraying fuel everywhere from the leak, so I’d disconnect the battery until the hose is repaired and the leak stopped. There’s a chance the computer has detected the lack of fuel pressure, but whether that’s what is preventing the engine turning over is another thing. You may have multiple problems.

On the surface, the two bootlids look very much alike. In shape, they may well be identical, but there's a catch. In 2012, Holden switched from the fully-imported Cruze to a locally built version of the same car. Which means that the two versions were painted in completely different factories (different countries, in fact) and the chances of two blues or reds or even whites colour-matching exactly are pretty slim.

If you look at the locally made Cruze line-up, you'll also see that many of the colours were shared with the Holden Commodore range (built in the same factory). The other thing to consider is that the paint on these cars was never stellar quality, and a decade or so of varying UV radiation exposure might mean that even two bootlids that started out the same colour, may not be now.

Compare the two bootlids in strong sunlight to gauge whether the colours actually match before committing to the swap. That said, if you do manage to match two bootlids in an identical colour, it will be a lot cheaper than having one resprayed.