Are you having problems with your Holden? Let our team of motoring experts keep you up to date with all of the latest Holden issues & faults. We have gathered all of the most frequently asked questions and problems relating to the Holden in one spot to help you decide if it's a smart buy.
Show all
Without knowing what your criteria is, it's hard to recommend a car to you, George. By all means go for a V8 if you need to tow a trailer for work or pleasure, though there's no lack of grunt with the six-cylinder engines on that front either. I would choose a six, and probably a Commodore, based on its better resale than the AU III, and go for a VX rather than a VT simply because it is a newer model and will have fewer kilometres on it. They are both reliable, so there's no real difference between them in terms of reliability.
Another reader has told us that Jamie should be able to find what he wants at Holcar in Lilydale (ph: 9739 6088). If that proves unsuccessful, Peter Simpson says he's got a sticker that might suit in his collection of old speedos and might be able to help out if Jamie cares to contact the Cars Guide office again.
Your need for a 1998 or later model for $10,000 makes things difficult. I would recommend you try a Nissan Pulsar N15 which was introduced in 1995 -- it's well built, reliable and has good resale value.
There's no reason the Avalon should be any thirstier than the Camry. They're about the same weight and they share the same V6 engine and drivetrain. The Avalon is locally produced, not imported, so the parts are the same price as the Camry's. On the current market the Magna is the best buy in that its used values have slumped, the Camry and Avalon are standing up well, while the Commodore remains popular and hence has good resale value. In terms of mechanical reliability, it's hard to go past Toyota and I would probably prefer the Camry or the Avalon, but all four have good reliability and will do the job well.
Sounds like you've got a nice FE there, Jason. I don't have any experience with devices like the fuel catalyst, but am sceptical of the claims made by their makers. You can modify your engine to run on unleaded fuel and that's what I would recommend. Any reputable engine builder can carry out the modifications, which involves fitting hardened valve seats to the cylinder head, and hardened valves. All that's doing is reducing the valve-seat wear which increases without the presence of lead, which acts like a lubricant on the valves and valve seats. It's also necessary to retard the spark on some engines so they run on ULP, although they might run quite happily on the higher octane PULP. I'd expect your engine, with its modest compression ratio of 6.8 to 1, to run quite happily on 91 octane ULP, but if it pings try PULP, or have the distributor modified.
Holden calibrated the Gen III to run on regular unleaded, so you are paying for a marginal increase in performance and fuel consumption, at best in the order of 2-3 per cent. The best way to check the value of running Pulp is to do a consumption test with both fuels. That way you will know the real benefits, or otherwise, in your own actual driving conditions.
Despite the law banning tampering with odometer readings, it does still go on within the industry. I've heard of drivers disconnecting the speedo or replacing the instrument cluster after they've done a modest amount of kilometres, fitting another cluster, and keeping the original one for when they come to sell it. It then shows the modest distance that was on the odometer when they made the original switch. And all that within the trade. As far as Holden dealers go, I would be most surprised if they were allowed to alter the speedo reading on demo cars.
I've put your concerns to Shell's technical people and requested an answer. Hope to be able to report back to you soon.
Metric conversion scales for speedos were popular at the time we changed from imperial measurements to metric, but I haven't seen one for years. I'm told Auto Surplus (ph: 9873 3566) and Auto Spares Galore (ph: 9758 3644) used to stock them, so it might be worth trying them. Other than that, you might keep an eye out for one at a swap meet. As for a new speedo, I don't believe there are systems available for the HT. One solution would be to make your own scale by applying a strip of tape to the speedo face at the appropriate speeds -- 50km/h, 60km/h and 100km/h.
It's largely prejudice based on a perception that supercharged engines (or turbo engines) are less reliable than normally aspirated engines. Apart from the bearings in the blower, the supercharged V6 in the Commodore and Statesman is quite reliable.