Are you having problems with your Holden? Let our team of motoring experts keep you up to date with all of the latest Holden issues & faults. We have gathered all of the most frequently asked questions and problems relating to the Holden in one spot to help you decide if it's a smart buy.
Show all
Your friend is basically correct, the Gen III V8 is calibrated to run on ULP, and running it on PULP would produce only a small improvement. Overfilling some engines with oil can lead to damage, but in the case of the Gen III it seems there is no danger. It should only be done as an added precaution on engines that do consume oil, and I wouldn't follow the practice if your engine isn't devouring oil. You sound like someone who keeps a close check on the oil level, so I would recommend you fill it to the correct mark and keep monitoring the level. The number of problem engines is quite small, Holden says it is less than 2 per cent of V8s, so I wouldn't be concerned unless your engine is actually using oil. The fix implemented by Holden from the start of VY has done the trick, according to engine rebuilders.
I would definitely dispute the need to do anything in this case. You should be able to detect a blocked injector. The engine should run a little rougher at idle and under load, but if it's not, I would suggest there is nothing wrong. The fuel consumption numbers you quote are in line with what I would expect from a VX II Commodore V6.
We checked with Peter Schweighofer of Swift Automotive in Melbourne who recommends the HM headers and exhaust system. If your car is an auto, he also recommends you have the shift pattern altered to make it sharper.
There have been problems with the timing belt breaking on the Astra engine, and the service interval has been cut from 120,000km to 60,000km. And there have been problems with the belt tensioner. Some have lost pressure and failed, and the belts have then broken.
Thanks, Steve, and good advice. The Commodore has always suffered from driveline shudder, mostly related to the driveline angles, and removing the spacers above the centre bearing changes the angles nicely.
The 186 would run well on PULP, providing you use an additive to make up for the lack of lead. The octane rating of PULP will suit the 186, but the lack of lead will accelerate valve seat wear. In terms of switching to a Commodore motor, there's no gain unless you go for a Nissan engine, as used in the VL, or a later V6. Earlier Commodore motors ran on leaded fuel just like your 186, and I'm guessing the modifications needed to fit a Nissan or V6.
I assume the pads haven't been changed yet. Take it to the dealer and ask him to treat it with anti-squeal lubricant, which should fix the problem. If the pads have been changed, check with the mechanic who did the job and find out which pads were used. If he didn't use factory pads, perhaps you should have the pads replaced with the Holden-recommended ones.
Thanks Matt. I'm sure Virginia will be keen to check it out.
Monaros have jumped in value in recent times, particularly those with the Chev 350 engine like yours. While the HQ isn't one of the most prized coupes, it is still a sought-after classic. The value of your car depends on its condition, but I would think it's worth up to $20,000 on today's market.
There are many detail differences, and I'd need to know which model Apollo you own to give you the rundown. With fuel consumption, it depends on how you drive and how well you maintain its tune, but under normal circumstances I'd expect 9.0 to 9.5 litres/100 km. The run-on could be caused by several things. I'd check the engine tune and make sure the idle and the ignition timing are set correctly.