2013 Holden Commodore Pricing and Specs

Presumably the car makes this noise when you hit a bump or undulation. The Commodore’s front end is not particularly complex and is, in fact, a pretty standard MacPherson strut set-up.

With that in mind, there are only so many things that could cause the front end to bang or rattle, including a worn ball-joint, tie-rod end, or suspension bush. But don’t forget about the bushes in the steering rack, too, as these can contribute to a noise from the front end.

If all the suspension checks out, then you need to go a bit deeper into things like the cross-member mounts, engine mounts and even wheel bearings. Any wear or play in these components will cause a clunk in the right circumstance.

If none of that helps then you need to look beyond the suspension and into areas like a loose battery tray in the engine bay or even a loose piece of trim or sheet metal somewhere on the car. Exhaust heat shields are prime candidates for this, as are the metal shields at the back of each brake disc.

They are probably blocked. Clean the nozzles out and make sure they are clear and flowing freely.

A Holden dealer, or an auto electrician should be able to sort it out for you.