2017 Holden Barina Pricing and Specs

Since you’ve been driving manual cars for many years now, you’ll be aware that some gearshifts are just better than others. However, none should be causing you to apply lots of force just to select a gear.

You could be dealing with a worn clutch which is making selection difficult, or a selector mechanism (cables, linkages and pivots) that are worn or have run out of lubricant. Even the adjustment of the shift cables can cause a problem like this.

I’d start with lubricating everything that connects the gearstick to the transmission and work the lever through the gears a few times to see if the lubricant makes any difference. If not, you might have to dig a bit deeper, checking for frayed shift cables of frozen joints. If you’re really unlucky, you may have wear or damage inside the gearbox that is making it difficult to select first gear.

But in the meantime, you can try this trick. When you’re stopped at the lights and ready to select first, instead of going straight for that gear, slip the lever into second for a brief moment and then try for first. Sometimes, this can assist selecting first, as you’re using the synchromesh on second to help with engaging first. This is often a great trick for a worn transmission.

It honestly doesn’t sound too bad given the average dealership labour rate is usually something like $160 or even $200 per hour to the customer. Also, genuine Holden parts for this type of job will always be preferable to aftermarket parts, and if the quote is to drive the car in and drive it out again with a brand new turbocharger working perfectly, then the price is probably pretty good.

If you want to save money, you can always try to find an independent workshop, but make sure you use one that knows this type of car and this type of repair. And don’t be afraid to ask about where the new parts are coming from.

This could simply be a case of the engine’s idle speed being set too low. If that’s the case, even though it’s firing on all four cylinders, it can feel rough and lumpy as though there’s something major wrong. Then, as you increase the revs, the engine smooths out and feels normal again. Even a worn or broken engine mount can amplify vibrations at idle, as can an exhaust leak.

A good mechanic will be able to tell you quickly whether this is the case or if, in fact, the engine really is dropping a cylinder at idle. If the latter is the case, you may have a dud spark plug, ignition wire, sensor or even a blocked or dirty fuel filter. Again, most mechanics won’t have a problem tracking this one down.