2022 Mazda CX-5 Pricing and Specs

The overheating is far from a mystery: Any time the coolant level in the radiator and cooling system drops below a critical point, there’s simply not enough coolant remaining to effectively cool the engine. So it gets hotter and hotter until it overheats.

The bigger question is why the coolant is leaving the radiator via the coolant recovery tank. In many cases, this is because of pressure from the combustion process finding its way into the cooling system. In turn, that’s very often caused by a failed head gasket which is allowing the combustion pressure into the coolant passages inside the cylinder head and crankcase.

The head gasket not only keeps combustion pressure (the result of the air and fuel being burnt in each cylinder) inside the engine, but also separate from the cooling system. But a failed gasket will often allow the pressure and the coolant to mix, at which point the pressure overcomes the pressure inside the cooling system and the coolant has to go somewhere. Generally, that somewhere will be the recovery tank as this is where the coolant goes in the normal course of its expanding as the engine heats up.

There’s a quick, simple chemical test that a mechanic can carry out to confirm whether the head gasket has failed, and this would probably be your first step. And don’t be tempted to continue driving the car and simply topping up the coolant. This type of leak can get a lot worse very quickly, and overheating can destroy an engine while you watch.

There’s been no recall for this model regarding oil consumption. And although there have been a handful of recalls for the CX-5, your car is not within the build-date parameters to be one of the affected ones.

It’s important to remember that often, a problem with a car sold in another market, won’t affect the same make and model in another part of the world. This can be because of vastly different operating conditions, different driving and usage habits and even the two apparently identical vehicles being built in different factories with different suppliers producing the parts.

Don’t forget, either, that all engines consume some oil. A turbocharged engine with its higher combustion chamber pressures will often sip a little more, but some oil consumption is part of the normal process of engine operation. That’s particularly true of modern cars which often use low-tension piston rings to reduce internal friction and, therefore, fuel consumption, at the cost of a little more oil consumption.

This is not as simple as perhaps it should be. Different carmakers use different methods to calculate cargo space, and Mazda uses the VDA method which uses 200mm X 100mm X 50mm blocks to determine the volume. In this case, the CX-5 has a volume of 438 litres with the rear seats up and 1340 litres with the seat folded down.

However, you need to know the dimensions in centimetres, so here’s how it pans out: The CX-5 has a luggage space length of 89.7cm with the rear seat in place, 171.5cm with the seat folded, a luggage space height of 82.7cm and a width of 105cm at its narrowest point.

Perhaps that helps, but the best way by far (if possible) is to visit a Mazda showroom with the wheelchair in question and physically see if it fits.