Hyundai Iload vs Mazda BT-50

What's the difference?

The iLoad remains one of the most competent all-rounders in the business. This highlights the excellence of its original design, as it hasn't changed much since it launched here more than a decade ago.

However, it's starting to show its age a bit, particularly in terms of safety compared to HiAce and Transit Custom rivals which have aggressively raised the mid-size van benchmark to a five-star standard that rivals most sedans and SUVs.

We hope Hyundai will soon do the same with the iLoad, because apart from increasingly outdated safety it's pretty hard to fault. We're sure its army of loyal customers would agree.

Key to the success of the BT-50 XS will be acceptance by fleet buyers. The vehicle, however, seems to be pretty well considered as far as that goes, although as with any stripped-down model, there are features that will be missed. Things like the manual air-conditioning probably won’t make much difference, but the lack of a tyre pressure monitoring system is a bigger issue for a working vehicle. Performance from the smaller engine is still well within acceptable parameters, but we reckon any buyer considering using much of the 3500kg touring capacity would be better off with the 3.0-litre engine offered in the rest of the BT-50 range.

The Mazda is not the best riding of its ilk, and there are competitors with bigger cabins, although, notably, at this point on the pricing ladder, these are often from China rather than Thailand where the Mazda is built. Ultimately it will come down to whether the smaller engine and reduced performance is an issue and also whether the money saved over the bigger-engined BT-50 is enough to justify that and the loss of some creature comforts. But since fleet managers are notoriously hard-nosed about this stuff, there’s a good chance to BT-50 XS will find a market.

Note: CarsGuide attended this event as a guest of the manufacturer, with meals provided.

The iLoad is 5150mm long, 1920mm wide and 1935mm high with a 3200mm wheelbase. That height means it can access underground and multi-storey carparks, in which it's also easy to manoeuvre with a relatively compact 11.22-metre turning circle.

No doubt a big factor in the rear-wheel drive iLoad's enduring appeal is its simplicity and ruggedness, combining MacPherson strut front suspension with rack and pinion steering, leaf-spring live rear axle and four-wheel disc brakes. A sliding door on each side of the cargo hold come standard. The large tailgate window, equipped with a wiper/washer and demister, provides the rear-view mirror with a relatively clear picture of what's behind even with the cargo barrier and clear plastic covering on it.

The cabin environment is bright and airy with a tasteful mix of light and dark grey surfaces. The light grey cloth seats with their colourful striped inserts look sharp but we reckon they would also show some grime pretty quickly in a working role.

Our only criticisms are that, like the new HiAce, there's no fold-down inboard armrest for the driver. We don't know why Australia's top two mid-size vans do not have this simple feature, because it's standard issue in numerous rivals and creates a more relaxed driving position.

Our other gripe is the centre passenger seat, which shares the outer passenger's base cushion but has a separate backrest which can be rotated forward through 90 degrees to reveal a handy storage tray and dual drink holder on the back of it.

However, passenger comfort and safety are compromised as the seat is too narrow for an adult, the backrest has no head restraint, there's very limited leg room and only a lap seat-belt. And to make matters worse, the belt's buckle digs firmly into your right butt cheek when it's clicked in. This ‘seat' should be for emergency use only and, if you must, only for short distances.

Targeting tradies and fleet customers has meant Mazda has embraced the concept of factory accessories. Right now, there are options for tougher front bumpers, bull-bars, snorkels, drop-side trays, an awning, wheel-arch flares (for bigger, aftermarket wheel and tyre packages) driving lights, roof racks, canopies, tub-drawer systems and even a dual battery set-up. All these factory options carry the full Mazda warranty.

But Mazda has gone even further with accessory packs aimed directly at different fleet markets. For instance, there’s the Mine-Spec Pack which incorporates a park-brake alarm, high-mounted brake lights, a reversing buzzer, work-lights, LED rear lighting and pre-wired switches for auxiliary and beacon lighting.

Externally, Mazda's design brief for the BT-50 has clearly been to not frighten the horses. But it's better than that, because it has actually emerged as one of the better looking utes out there. In XS trim, even the steel wheels add a no-nonsense flavour to the overall effect. And where some of the competition appear to be trying very hard to ape the full-sized US-made pick-ups, the Mazda is its own thing.

Inside, the smaller info screens and simple layout in basic black tell the budget story. At the same time, there's a lot to like in terms of the clear, simple analogue gauges and the no-fuss controls including the conventional T-bar, park-brake and ignition key. There's a look and feel that also suggests this is a ute that should be able to take a few knocks in the course of earning a living.

The iLoad's 2062kg kerb weight and 3160kg GVM results in a genuine one tonne-plus payload rating of 1098kg and up to 125kg of that can be carried on roof racks. It's also rated to tow up to 1500kg of braked trailer and with a GCM rating of 4660kg (or how much you can legally carry and tow at the same time), that means you can do it at maximum GVM.

In other words, it can legally carry more than a tonne while towing 1.5 tonnes. Those numbers make the iLoad a very practical and versatile workhorse, well suited to a variety of trades and other working roles beyond the usual delivery chores.

The cargo hold, with its 2375mm length, 1620mm width and 1340mm height, offers a total load volume exceeding 4.4 cubic metres and is accessed through sliding doors on each side or via the single-lift tailgate. The load floor with its protective vinyl mat has a total of 10 load anchorage points.

There's no full-length roof lining like the new HiAce but the cargo hold walls and doors are lined to hip height and there's one internal light at the rear. The load floor length and 1272mm between the rear wheel housings means the iLoad can theoretically take two 1165mm-square Aussie pallets (without the cargo barrier installed).

However, loading these could be an issue if fitted with the single-lift tailgate, as it blocks forklift access when opened. And the 870mm side door opening (even less with the cargo barrier fitted) is not wide enough to allow a pallet to pass through it, so do your homework on the iLoad's suitability for your loading requirements.

The cabin has storage bins and bottle holders in each door, plus a shallow tray in the centre dash-pad, two different-sized gloveboxes, a cubby near the gearshift for small items like chewy etc and a pop-out dual cup/bottle holder in the centre console. The centre seat backrest also folds forward to reveal a large open storage tray and two small bottle/cup holders.

With a choice of cab-chassis of pick-up tub, not to mention the option of a single or dual-cab body in cab-chassis form, the XS allows for a fair bit of creativity in how it’s configured. The cab-chassis, for instance, will accept a conventional drop-side alloy tray or any number of service body configurations right up to camper bodies.

The stock tub on the pick-up version gets a drop-in liner but there’s no power outlet or light that some of the competition offer. The tie-down points are also a bit disappointing with two lower points in the rear of the tub and a pair of higher points in the front. Experience tells us that high-mounted tie-down points are vastly less practical than anchor points mounted close to the cargo floor.

The move to the larger engine has, however, increased the Mazda’s towing ability. From the previous version’s 3000kg towing limit, the new 2.2 can now legally tow 3500kg (with a braked trailer and approved tow-hitch). Payloads vary according to specification, but range from about 1000kg right up to 1379kg for the XS singe-cab-chassis.

The factory-option drop-side tray carries it’s load up high, but offers a flat floor with no wheel-arch intrusions. The standard tub is not as large in any direction, but does have a damped tailgate for safety (you can’t drop it) and convenience (the gas struts help raise it).

In the cabin, you get USB charging ports (two in the front, one in the rear seat) and there are central air-vents for the rear seat of dual-cab models. The dual-cab also has an under-seat storage area, two gloveboxes and a 60/40 split fold rear bench. The doors feature bottle holders and there’s a flip-down glasses compartment in the roof lining.

While the front seats are comfy enough for bigger drivers, the rear seat also goes against dual-cab tradition a little by having plenty of room in every direction, as well as a rational seat-back angle.

While the XS remains the entry-level BT-50 variant, you once again have the choice of two or four-wheel drive, with price-tags to match. So, starting at the start, the 4x2 XS single-cab cab-chassis now kicks off at $37,900 before on-road costs with the dual-cab pick-up (styleside) 4x2 variant at $46,710.

Move up to all-wheel drive and there’s no single-cab option. Instead, things start with the dual-cab cab-chassis 4x4 at $53,120 and the dual-cab pick-up at $54,720.

Aside from the bigger engine and stronger performance, you now get an eight-speed transmission and there’s fuel-saving stop-start tech that was once only available on higher-spec BT-50s.

Other additions for the XS include LED headlights, adaptive cruise control, wireless connectivity for both Apple Car Play and Android Auto, a reversing camera and an 8.0-inch touchscreen. There’s also digital radio and hill-descent control.

But the XS’ place at the bottom of the BT-50 ladder is confirmed with the cloth-trimmed interior, vinyl flooring and plain steel wheels for all but the dual-cab pick-up 4X4 variant which gets alloy wheels.

Which is all fine and gives the Mazda something of a pointy stick with which to poke at the incoming competitors (mainly) from China, but where does that place the XS relative to the 3.0-litre BT-50? Well, if you take the XT variant with the 3.0L engine and the same body and driveline layout, the XS comes in at just $2500 less. That’s not a huge saving either as an outright number or in terms of the monthly lease repayments.

Part of that is because Mazda has also hiked prices across the BT-50 range in tandem with announcing the new XS. Which means that spec-for-spec 1.9 versus 2.2-litre XS is now $1500 more than it was. But even if Mazda had held prices on the XS variants, would $4000 be enough of a difference? For reference, the original XS sliced $3000 off the 3.0L price when it was launched back in late 2021.

There are areas where you can see where Mazda has pulled a few dollars out of the vehicle, starting inside with the small centre touchscreen, the truly tiny central dash-cluster screen, and the cloth trim. There’s also a bit of hard plastic in evidence and the air-conditioning lacks the set-and-forget function of climate control systems. The keyless entry and start has gone and the XS is started with an old fashioned ignition key. The XS specification also loses the front and rear parking sensors and the tyre-pressure monitoring system.

You might also imagine the drum rear brakes are another giveaway but, in fact, they’re standard across the whole BT-50 line-up.

The iLoad's 2.5 litre four-cylinder DOHC 16-valve turbo-diesel is a refined and proven performer with Euro 5-emissions compliance (so no AdBlue needed), common rail direct injection (CRDi) and variable vane turbocharging with impressive flexibility. It produces a class competitive 125kW at 3600rpm and peak torque of 441Nm between 2000-2250rpm, but there's ample throttle response and pulling power on tap either side of those figures.

The five-speed torque converter automatic is an equally robust and proven transmission, although most rivals have updated to closer ratio six-speed units. Even so, the iLoad delivers crisp and smooth shifts in auto mode, with the option of sequential manual shifting if required. The transmission's gearing and 2.92:1 final drive ratio provide a good compromise between stop-start city delivery work and economical highway driving.

The new engine capacity of 2.2 litres is up from the 1.9 of the previous XS version but still well short of the 3.0 litres of the more expensive BT-50 versions. And the specifications are pretty much exactly what you’d expect with the new 2.2 just about splitting the difference between the old 1.9 and the 3.0.

In this case, that equates to 120kW of power and 400Nm of torque, while the 1.9 was good for 110kW and 350Nm, and the 3.0 sports 140kW and 450Nm. So, yep, somewhere right about the middle. And that makes sense given the new 2.2 uses the basic mechanical architecture of the 1.9.

But the switch up to the new engine brings one very important change and that’s the adoption of an eight-speed automatic to replace the six-speed unit fitted to the previous XS and the other BT-50s. That has an obvious potential benefit for drivability, but also for fuel economy.

Mazda has also added stop-start tech to the XS in the name of efficiency. But, as we’ve found many times before, the fuel economy benefits seem restricted to the official test results rather than the real world where this technology serves to annoy many drivers more than anything else.

If you opt or the four-wheel-drive variants, you’ll get a rear diff lock but you miss out on an on-road 4x4 setting. Considering the 2.2-litre’s newfound towing capacity (the full 3500kg of the competition), that lack of a 4x4 Auto setting is a shame, but not an unexpected one at this price-point.

Hyundai's official combined figure of 8.8L/100km seemed realistic at the beginning of our road test which included a variety of roads and payloads, from near empty to three-quarters of a tonne. So we were impressed to see near-identical numbers after crunching trip meter and fuel bowser readings. Needless to say, that's great economy for a one-tonne van and no doubt another reason for its enduring popularity. Based on our figures, you could expect a realistic driving range of around 870km from its 75-litre tank.

While one of the expected benefits of the 2.2-litre engine compared with the three-litre unit is a reduction in fuel consumption, the new 2.2 engine goes one big step further by actually being more frugal than the 1.9-litre engine it replaces. Well, in terms of the official government test, anyway.

The single cab-chassis model in new 2.2-litre, two-wheel-drive form posted a combined (urban-highway) fuel number of a creditable 6.9 litres per 100km. Compared with the mechanically similar 1.9 single cab-chassis, that’s a saving of 0.1 litres per kilometre, and a corresponding drop in tailpipe carbon emissions of 1 gram per kilometre.

To be honest, this small improvement is probably largely due to the stop-start system now fitted, which many drivers will turn off at the first opportunity. Even so, the new eight-speed transmission must also be playing a part, so let’s call the old and new engines line-ball in the real world.

The rest of the XS line-up scored official figures of 6.3 litres per 100km for the double-cab pick-up 4x2, 7.1 litres for the double cab-chassis 4x4 and 6.6 litres per 100km for the dual-cab pick-up 4x4.

With the BT-50’s standard 76-litre fuel tank, the theoretical range is more than 1000km. In reality, that’s going to be closer to 800km.

The BT-50 engines do not require AdBlue additive to reduce exhaust emissions.

The iLoad has big grab handles on the windscreen pillars to assist entry and once aboard it's not hard for drivers of most shapes and sizes to find a comfortable position, thanks to the height-adjustable seat, height-and-reach adjustable steering wheel and decent-sized left footrest.

The instrumentation is easy to read and dashboard controls are clearly marked and intuitive to use. There's a clear eye-line to the left door mirror but given that there's no blind-spot monitoring, this mirror would benefit from the addition of at least a dedicated wide-angle lens.

In city and suburban driving the iLoad is surprisingly quiet for a van without a sealed bulkhead between cabin and cargo hold. However, tyre roar emanating from the rear wheel housings does become quite intrusive at highway speeds, particularly on coarse bitumen surfaces.

The over-driven fifth gear ensures the engine isn't working hard though, with only 1800rpm at 100km/h and 2200rpm at 110km/h, which contributes to good fuel economy on long hauls. The cruise control also works well and is a big improvement on the last iLoad we tested in 2017.

The 2.5 litre turbo-diesel and five-speed auto are well-honed for this working role. They provide ample performance in city and suburban driving, even though the gaps between five gears are more noticeable now given the increasing use of six gears in rival automatic vans.

Striking the right balance between ride comfort and load-lugging capacity has always been the big trick with utes in general. The fact is, there’s probably no ideal setting, especially considering the range of payloads a ute can be expected to carry on any particular day. In the BT-50’s case, Mazda has opted to go for a stiffer suspension tune. That means it can technically tow and haul with the best of them, but it also dictates that ride quality is far from what you’d call plush, even in this market segment.

The ute handles bumps best when the undulations don’t come too hot and fast. But strike a patch of high-frequency lumps and bumps and the suspension, particularly at the rear, starts to pogo about with a corresponding decline in ride control. The steering, too, seems to lack a little feel and is relatively slow-geared (although that has its benefits off-road).

The engine certainly does the job in isolation, but it’s likely to struggle a little with the full three-and-a-half tonnes on the hitch. It’s pretty noisy, too, and definitely sounds like a diesel, unlike some modern diesel designs that are more refined. There’s also a sense that Mazda has ditched some of the sound deadening of other BT-50 models, as the engine is certainly heard and felt. The optional snorkel moves the induction noise right into the driver’s window when it’s open, too.

But the new eight-speed automatic transmission is a beauty. Upshifts are crisp and smooth and even the downshifts as you approach a full stop are measured and calibrated to never intrude. And it’s nice to see a conventional T-bar shifter with no separate park button or non-intuitive movements required.

We didn’t get a chance to try the BT-50’s off-road chops, but past experience tells us that the Mazda will be pretty good. As with many four-wheel-drive utes, the limiting factor will be the standard tyres fitted at the factory.

While alloy wheels and carpets on the floor might be negotiable on a vehicle like this, a basic level of safety gear is not. So, the XS gets front, knee and side-curtain airbags, as well as givens such as anti-lock brakes and stability control.

But it doesn’t stop there with the BT-50 XS also fitted with the bulk of the current driver aids. Those include blind-spot monitoring, lane keeping assistance, lane-departure warning, rear cross-traffic alert and the reverse camera system. There’s also autonomous emergency braking which can also identify pedestrians and cyclists.

You also get Mazda’s own take on the controversial driver-attention monitor which many ute makers simply haven’t managed to get right in terms of the system’s calibration and how aggressively it acts. The BT-50’s is one of the less intrusive ones.

What’s missing? On a vehicle designed to tow big loads, a tyre pressure monitoring system is a great addition, but not one you’ll get on a BT-50 at this price. We’d also like to see an on-road 4WD setting which would allow the use of all-wheel drive when, say, towing on a bitumen road. More expensive competitors have this, but the Mazda is hardly alone in not offering this tech at this entry-level price.

The XS variant picks up the five-star ANCAP safety rating already awarded to the rest of the BT-50 line-up.

Five years/160,000km warranty. Scheduled servicing every 12 months/15,000km whichever occurs first. Lifetime Service Plan includes capped-price servicing for first five scheduled services ranging from $356 to $506.

Mazda’s standard five-year/unlimited-kilometre warranty applies to the BT-50 range, and includes the first five years of roadside assistance, too.

Service intervals are every 12 months or 15,000km, whichever comes first. Capped-price servicing is available with the first five years of servicing costing $2188 on 4x2 versions and $2302 for 4x4 variants.

It’s worth mentioning that the BT-50’s new engine is Euro 5 compliant but doesn’t require AdBlue, reducing running costs.