2023 Hyundai I30 Pricing and Specs

This is the vehicle thinking that it’s being taken without the ignition key. In other words, stolen. The solution is to connect the negative terminal, then quickly put the key in the ignition and turn it on. This will let the car know that the key is present and there’s no threat of it being stolen.

Don’t be tempted to insert and turn the key to the on position and then connect the battery, as this could cause the battery terminal to throw a spark which is dangerous and could even send an electrical spike through the car’s computer.

You may also find that locking and unlocking with the key fob will also silence the alarm, but using the ignition key will be the quickest way to do this and minimise your neighbours’ wrath.

There are many reasons this could happen, and they could be mechanical or electrical. An engine that revs freely with no load on it, but goes weak at the knees when a load is placed on it, could be suffering from poor fuel supply, a faulty ignition system, internal wear, a blocked exhaust or even a worn driveline that is creating excess friction. You could even have a seized brake or something equally fundamental going on.

But it’s also true that the car’s computer can send the engine into what’s called limp-home mode if it detects a serious problem. Limp-home mode limits the amount of power the engine can make or how fast it can rev, as a means of protecting it against further, more serious damage. Perhaps that’s what’s going on here. Certainly the symptoms match that diagnosis. The best advice is to have the car electronically scanned to see what fault codes are thrown up by the computer. Only then do you have a decent starting point on where to look for the root problem.

This is not an unknown problem with some Hyundai engines, although, to be fair, most of the oil burning problems were in earlier models than yours. That doesn’t mean you don’t have the same problem, though, and it’s definitely worth checking out and finding a solution.

The first thing to do is to contact Hyundai Australia’s customer service department, and let them know you have a problem. My experience has been that Hyundai takes customer satisfaction very seriously.

The next step is to determine exactly how much oil is being consumed. The dealership will be able to help here and will probably fill the engine with oil, seal the dipstick and send you away to cover 1000km or maybe more. Then, the oil level is checked again and you’ll know precisely how much has been consumed over a known distance. Based on that information, you may be able to negotiate a deal with Hyundai that sorts the problem without you paying for the entire bill (if, for instance, it’s determined that a new engine is required).

Obviously, there are lots of factors at play here, including how many kilometres the car has covered and its service history. But it’s definitely worth getting to the bottom of the problem sooner rather than later.