Chrysler 300C 2007 News

Manufacturers including BMW, Fiat Chrysler Automobiles (FCA), Peugeot and Citroen have issued recalls via the Australian Competition and Consumer Commission (ACCC).

Only a fraction of the 1.2 million cars on Australia roads with airbags that can spray shrapnel have been fixed, new figures show.

The souped-up version that will pace the Iveco Australian MotoGP field this weekend even managed to blow its own lights out during a test run at Calder Park. The roof-mounted light pack couldn't cope with 160km/h and parted company with the big V8 on its first flying lap. A few "technical adjustments" and it should be ready for more serious duty keeping Casey Stoner and Jorge Lorenzo in line on Sunday. The Chrysler Group is the official supplier of vehicles for the Phillip Island event and will have 16 cars on duty - six SRT8s, three Jeep Grand Voyagers, six Grand Cherokees and a Wrangler. The regular SRT8 doesn't need much motivation - its 6.1 litre V8 produces 317kW and 569Nm. The two course cars, though, have been "Mopar-vated", with the Chrysler Group's performance arm catalogue raided to fit more than $7000 in upgrades. The kit includes a Mopar exhaust, cold-air intake, coil overs and front sway bar. Jeep spokesman Dean Bonthorne says the upgrades give the course cars the handling and the sound to head the MotoGP field. "A 300C sounds pretty good anyway but the Mopar exhaust really makes it bark. It's a must-have for the SRT8," he says. A back-to-back run in a regular car and the tricked-up version around Calder Park shows the Mopar model hangs on like a tired two-year-old. It turns in to corners at speeds the standard SRT8 wanted to go straight ahead for and then copes with more throttle coming through the corner. Power isn't hugely up on the standard car but there's enough difference to steadily gain ground on the straights. Turn the traction control off on either model, though, and it doesn't take much effort for the torque to wring the traction out the tyres. MOPAR MOJO The Mopar aftermarket parts sales are huge in the US and have a small but staunch group of supporters Down Under, especially those who import North American vehicles. Items range from interior trim upgrades and weathershields to specialist kits for drag and off-road racing. Chrysler's motorport involvement is limited to Greg Crick driving a Dodge Viper in the Australian GT Championship and Lee Bektash in the Team Mopar drag racer. Bektash watched bemused as the SRT8 ran around Calder Park, then offered some advice on how to experience the ultimate in Mopar-enhanced speed. "There's nothing like this, mate," he says, patting his carbon-fibre and alloy Dodge Avenger pro stock racer. "Zero to 100(km/h) in 0.8 (second), I'll change gears five times the first 4.3 seconds of the (quarter-mile) run and we're pulling more than 300 (km/h) at the end. I don't care what else you do - you can't beat that." Bektash set a 7.03 second pass at this year's Winternationals in Queensland.

And if the predictions are correct, this time the Caliber will have a bit more gunpowder to back up its name. Thanks to the ownership by Fiat, the Chrysler family-owned Dodge Caliber will sit on the Alfa Romeo Giulietta "Wide C" platform and make its appearance at the 2012 Detroit motor show in January. The "Wide C" platform will also provide the underpinnings for the 2013 Alfa SUV and possibly the later Jeep Compass and Patriot. Caliber may get access to the Giulietta's 173kW/340Nm 1.75-lire turbo-petrol engine to create a hot SRT4 version, though most will either retain Chrysler's tired 2.4-litre petrol engine or gradually move into the hi-tech Fiat Group MultiAir engine range.

It's the make-or-break Chrysler 300C that cost the bankrupt corporation more than $1 billion and must work to give Chrysler some much-needed leverage in its global partnership with Fiat.The 300C will eventually also wear Lancia badges in some countries but, as it is revealed today in Detroit, is a new hero for Chrysler.  It looks good and tough, is suitably lightweighted and technologically loaded, and is promised at value prices.The bad news for Australia is that right-hand drive production is a low priority and the new 300C will not land until 2012. Until then, Chrysler Australia has 12-months' stock of the outgoing car.Chrysler has a totally new take on the 300C, which retains some of its gangsta impact but is more modern in everything from the front-end styling to slimmer pillars and windscreens that drop away much more dramatically than the upright glass of the current car.It retains rear-wheel drive but has much-improved suspension and steering, the key engine is the new-generation Pentastar V6 already fitted to the Jeep Grand Cherokee, and pricing in the USA starts as low as $27,995.  Chrysler has done a lot of work on touchy-feeling stuff, from better shaping in the seats to heated-and-cooled seats and cupholders, a 20cm touch-screen infotainment system and a dual-plane sunroof.The new 300C can roll on 20-inch alloys and there is more than two metres of acustic insulation and underbody paneling to smooth airflow and cut drag and fuel economy.The new 300C is displayed at Detroit alongside a revamped Voyager minivan and massively-updated 200 sedan that both reflect the new styling direction from Chrysler's hero car.

The renewal work makes it more elegant and stylish, including a considerable quality tweak in the cabin, but it still has the chunky body and hunkered-down look which has made it a global winner for Chrysler. But don't expect the all-new 300C in Australia any time soon, even though Carparazzi has caught three production-ready cars with its cameras.  A production switch for the new 300C means there will be no right-hand drive cars until 2012. Chrysler Australia has stocked-up on the existing model, with around 400 cars in the pipeline, to carry it through the drought but is not making any promises on the sales start for the new model.  It could have trouble clearing the backlog, based on the latest Carparazzi pictures. They show a car which looks a little shorter than the current 300C with styling taken from the 200C motor show concept car.  The shape of the new-look headlamps is obvious and so is the front fascia, including LED daytime running lamps. Cut-outs in the Chrysler camouflage along the front bumper and mudguard reveal a new sensor that Carparazzi sources say is for a frontal-collision warning system, adaptive cruise control and a blind spot/side assist system. On the sides, the 300C shows new rocker panels, a body crease that sweeps downwards toward the nose and new chrome-capped side mirrors.  The rear doors have also had the black plastic square at the rear swapped out in favor of more glass. In the rear there are LED tail lamps and a bumper with integrated chrome exhaust tips.  There are huge changes inside, with the test cars revealing a solid, leather-stitched dash top similar to the one in the all-new Jeep Grand Cherokee now in production. There is also a large analogue clock for a bit more class and a massive navigation and entertainment screen. Carparazzi sources say there will be lots of LED lighting and a 500- watt Alpine premium audio system.  The new 300C rides on an updated version of Chrysler's LX chassis and comes with the new Pentastar 3.6-litre V6, also fitted to the new Grand Cherokee. There are also 5.7-litre and 6.4-litre Hemi petrol V8s and a diesel engine. Chrysler is aiming to start production at it's Canadian factory in Ontario during the last week of December, 2010, pointing to an official unveiling at the Los Angeles Auto Show in late November.

The wholesale restructuring of the US car industry has yielded some little gems of information, some of them from Chrysler.

Chrysler will axe four models next year in a global cost-cutting plan.The vehicles to go include the Chrysler PT Cruiser convertible, Chrysler Crossfire sportscar, Chrysler Pacifica SUV and the Dodge Magnum (a wagon version of the 300C sedan).Australia only imports the PT Cruiser convertible and Crossfire.DaimlerChrysler Australia/Pacific PR manager Jerry Stamoulis emphasised that the PT Cruiser sedan would remain and that the cabrio was “only low volume; about 10 a month”.However, he admitted the loss of the Crossfire would be a blow.“Crossfire is the biggest blow for us because it's a very attractive car, drives well and had a positive response from media and public,” he said. “But as yet we have received no date as such for these to be cut.”While cutting its cloth to fit a suspected worsening in the US economic climate, Chrysler will next year add four models.There will be two new Dodges — the Journey minivan and Challenger large-medium sedan — plus two new hybrid SUV models — the Chrysler Aspen and Dodge Durango.Stamoulis said the Challenger was in left-hand drive only.“So that is not a plan at all at this stage,” he said.“It is early days for discussing the hybrids. They are developing the hybrids for the US, but there are no specific dates for us as yet.“The Dodge Journey we are working on bringing to Australia in 2008, but they have not officially said whether it will be released here.“At this stage it is looking likely for later in 2008.”Stamoulis said Chrysler's Australian portfolio would not suffer from the loss of two models.“It's not as if we don't have a decent portfolio,” he said.“We've had five new models this year — the Sebring, Avenger, Compass, Patriot and Nitro — and the sixth will be Sebring Cabrio in December, so essentially we've brought in six new cars this year and are losing two in the next 18 months.”Chrysler Australia will also re-introduce the new Voyager and launch the Jeep Cherokee in February.Global Chrysler chairman and CEO Robert Nardelli said the impending model cuts reflected an expected reduction in sales next year.The new round of cutbacks follows an earlier announcement that Chrysler planned to chop 85,000 units from its fourth-quarter production plans.“These actions reflect our new customer-driven philosophy and allow us to focus our resources on new, more profitable and appealing products,” he said.The cuts will lead to a loss of 12,000 jobs in American factories.Nardelli said their plans were in addition to cutting 13,000 jobs by the three-year Recovery and Transformation Plan announced in February.

The big, bold car grille is emerging as the styling feature of cars to come.

Trevor Creed admits the cabins, in particular, are nowhere near as good as they need to be to challenge the Japanese.He is happy with the way the latest arrivals look; from the compact Dodge Nitro to the brutal Chrysler 300C and the all-new Journey family crossover just displayed at the Frankfurt Motor Show but admits they are lacklustre inside.Creed made quality design a priority for Chrysler last year, but is still forced to defend the cars in showrooms today because of a system that was too slow and too outdated to deliver what shoppers expect in their cars.“Previously, everything sort of fell backwards. We're trying to recover from that,” he says.Creed has even formed a special design team to make the changes, though the group has been operating since the end of last year and even the Journey is not up to Japanese standards.“They have done their first interior for a next-generation product and been very, very successful,” Creed says.But he is still asking for patience on the improvements.“It will be two years before you see the full fruits, in terms of major products,” Creed says.So expect improvements, but not in a rush. And why?“The cost pressure in the US is just enormous (and) we don't charge the prices (there) that we charge in the rest of the world,” he says.That means cars built to a price point in America must face up to tougher rivals when they head overseas.That is tough to overcome, but Creed says it is happening.