2019 Hyundai Kona Pricing and Specs

I can understand why the crank angle sensor was the first thing to be changed. These often start to die and the first symptom is an engine that stops after running for a while. But you’re right to be sceptical about the timing chain as there’s a theory that says if the engine runs properly at all, then the issue won’t be anything fundamental. Which is to say, if the timing chain was stretched beyond the point at which the engine could function properly, it wouldn’t function properly at all, regardless of how long it had been running.

A good workshop should be able to scan the car’s computer. If the timing chain really is stretched, then the computer should have logged this as a problem. If not, then you’re looking for something else. Of course, what that something else is the million-dollar question. Don’t rule out basic things like a dirty fuel filter which can allow fuel to flow for a while before the rubbish in it clogs the flow after a few minutes running.

That said, if the engine can’t locate the correct signal from the camshaft (which is controlled by the timing chain) it will sometimes look for a stand-in signal somewhere else on the engine, allowing it to start but not run properly. An electronic scan is definitely the way forward.

It’s pretty simple, James, and despite both two and four-wheel-drive being offered on all trim levels of the Kona, there’s one thing to check that will answer your question: If the vehicle has the two-litre, non-turbocharged engine, it’s a two (front) wheel-drive. If it has the 1.6-litre turbocharged engine, it’s an all-wheel-drive Kona. Hyundai never offered a front-wheel-drive Kona with the turbo engine, nor all-wheel-drive with the non-turbo.

Beyond that, there were some other major technical differences that will also tell you what you’re looking at. The front-drive Kona has a simpler, torsion-beam rear suspension, while the AWD version has a multi-link arrangement. Then there’s the transmission. Front-drive Konas got a six-speed conventional automatic, while the AWD Kona got a dual-clutch seven-speed transmission.

It’s not unknown for a car-maker to receive a batch of parts from a supplier where the parts in question have a materials or manufacturing flaw in them. Certainly, enough Hyundai owners have reported this same problem for that to be a reasonable hypothesis. The theory about the gear in the steering system is one possible cause for the noise you’re hearing, but I’ve also heard other mechanics suggest that it’s the clock-spring (that electrically powers the air-bags, steering wheel controls, yet still allows the wheel to turn) that’s at fault.

Either way, it’s a warranty job for the dealer to sort out, but experience has shown that Hyundai’s dealers are very good at keeping their customers happy. Meantime, the replacement part should be from a later, improved batch, without the inbuilt flaws, so it shouldn’t happen again.