Holden Vectra 2004 Problems

Are you having problems with your 2004 Holden Vectra? Let our team of motoring experts keep you up to date with all of the latest 2004 Holden Vectra issues & faults. We have gathered all of the most frequently asked questions and problems relating to the 2004 Holden Vectra in one spot to help you decide if it's a smart buy.

Used Holden Vectra review: 1997-2006
By Ewan Kennedy · 08 Oct 2014
Holden Vectra was designed and built by Opel, the German division of General Motors. Some models were assembled by Holden in Australia with some changes to suit Australian driving conditions as well as Australian drivers' tastes. The Vectra was medium sized when launched in Australia in June 1997. From March 2003 it
Read the article
2004 Vectra jolting after stopping
Answered by Graham Smith · 19 Aug 2016

It's most unlikely that the problem is related to the belts. Have the throttle body cleaned and the idle speed checked.

Holden Astra: Issue with timing belts
Answered by Carsguide.com.au · 02 Jan 2004

There have been problems with the timing belt breaking on the Astra engine, and the service interval has been cut from 120,000km to 60,000km. And there have been problems with the belt tensioner. Some have lost pressure and failed, and the belts have then broken.

Holden Vectra starting problems
Answered by Graham Smith · 20 Oct 2017

There could be a number of reasons it won’t start, from a battery that’s down, a problematic starter or starter solenoid, a poor electrical connection in the starter circuit, or a problem with the ignition switch.

Vectra transmission slips into neutral
Answered by Graham Smith · 12 Feb 2016

There’s no way of checking it easily. Take it to an automatic transmission specialist who will be able to check the transmission and diagnose the problem.

Holden Vectra 2004: How do I jump-start my car?
Answered by David Morley · 21 Dec 2019

Jump-starting a modern, computer-controlled car is fraught with dangers. Get it wrong and you can fry the electronics and that’s bound to cost plenty if you damage – and need to replace - the on-board brain. The conventional advice is to connect the positive lead of the jump-start kit to the positive terminal of your car, but attach the negative lead of the jump-pack to a solid, metal part of the car. As in, not the actual negative battery terminal. That reduces the chance of sparks that could ignite the flammable gasses batteries give off. Make sure the ignition is switched off when you connect, too.

The best advice is to also make sure you’re using a set of surge-protected jumper leads ort a jump-pack that’s similarly protected as it’s the power surge (or spike) that kills electronics. The other piece of advice is; if you’re unsure about jump-starting, leave it to somebody who knows.

Ask Smithy Xtra Holden Vectra timing belt
Answered by Carsguide.com.au · 05 Jul 2011

Our information is that it needs to be changed at intervals of 120,000 km. If you want to confirm that, I suggest you contact Holden’s Customer Assistance Service.

Timing out
Answered by Graham Smith · 29 Feb 2008

HOLDEN says the correct change interval is 120,000km or eight years, whichever comes first.

Disclaimer: You acknowledge and agree that all answers are provided as a general guide only and should not be relied upon as bespoke advice. Carsguide is not liable for the accuracy of any information provided in the answers.
Have a new question for the CarsGuide team?
More than 9,000 questions asked and answered.
Complete guide to Holden Vectra 2004
Complete guide to Holden Vectra 2004 CarsGuide Logo
Reviews, price, specs and more