Are you having problems with your Holden? Let our team of motoring experts keep you up to date with all of the latest Holden issues & faults. We have gathered all of the most frequently asked questions and problems relating to the Holden in one spot to help you decide if it's a smart buy.
Show all
If your calculations are correct, your car isn't returning the fuel consumption it should. The Australian Design Rules (ADR) test fuel consumption on your car is 11.5 litres/100km city driving and 7.2 litres/100km highway driving. From those figures I'd reckon on getting 11-13 litres/100km in normal round-town driving conditions. I suggest you take it to a Holden dealer to have it checked again.
THANKS Alan. You can't beat the experience of someone who actually worked on the cars.
We contacted Holden for their response, which is: ``While it is impossible to diagnose a car without sighting it, rough running on start-up and/or hard starting can be caused by many things, including leaking injectors, carbon build-up on the valves, etc. Injectors wear over time and are also subject to deposits from the fuel. Given the age of the vehicle, injector leakage is a possibility. This is not a generic V6 problem. If the injectors are in fact leaking, this is a maintenance item. Injector leakage can be tested by carrying out a pressure test and confirming pressure drop.'' I think this is good advice. Take the car to a fuel-injection specialist and have them check the injectors, and think about having them cleaned.
The EH club is a good place to start. They will be able to give you a guide to its value. Ph: 9762 0760.
The Commodore will need an upper cylinder lubricant added to the fuel if you run it on ULP. The Toyota should happily run on ULP without any additional lubrication.
On the surface it sounds a reasonable deal. You would expect a VT to have done 90-110,000km on average, so the mileage is below average. The trade is paying $11,000-$13,500 for a VT S at the moment, and retailing them at $15,000-$18,000. Check the car thoroughly, and make sure the odometer is correct.
I'm sure the FJ guys will be interested in your fix as they get ready for the 50th anniversary celebrations later this month. Old flat Dunlops Q Reading Ray Milward's problems with the tyres on his BA XR6 I was reminded of a similar problem with Dunlop tyres on the EJ Holden in the 1960s. The tyres would develop a flat after standing overnight, especially in the cold weather, and it would take four or five kilometres before the flat spot would be ironed out. Peter Hanrahan Warburton A It sometimes amazes me that while we've come a long way with car design, we haven't come that far at all. I'm sure there'll be lots of older drivers having a little chuckle thinking of those Dunlop tyres.
Have you noticed how well your car stops compared with those you were probably running around in 20 years or more ago? That stopping power has come courtesy of a number of improvements, including greater friction between the rotors and pads, and that has been achieved by softer pads and softer rotors. That unfortunately comes at a cost of increased brake wear in general and the need to replace rotors on a regular basis where we once almost never needed to.
Thanks Steve. Hopefully it will provide the answer.