2003 Holden Cruze Pricing and Specs

This particular error code denotes a lean running condition. That is, the engine either has too little fuel or too much air entering it. It's actually quite common on this engine and can be traced to several possible causes. Some of those include bad fuel injectors, a worn fuel pump, an intake vacuum leak, or – and this is where we'd look first on this engine – a bad PCV valve.

This valve is responsible for controlling the crankcase ventilation, but if it fails, it can allow the lean mixture condition to emerge which is when you'll get the error code and a check-engine light. The good news, is there's a quick and easy check if you know your way around an engine.

First, remove the plastic engine cover to reveal the rocker cover and the PCV valve. With the engine running, place a small piece of paper over the hole in the PCV valve. If the paper is drawn to the valve, you have a leaking PCV valve probably due to a broken diaphragm which is allowing extra air to enter the engine and create the lean mixture. If that doesn't work, make sure the oil cap is fitted tightly as a loose cap can cause the same problem. This certainly isn't the case for all engines, but experience has shown that in your car, it's a good place to start.

If the PCV valve theory doesn't work out, you're back to looking at things like fuel pressure, injector condition, intake tract leaks, a bad mass airflow meter or even a powertrain module fault.

The knocking noise could be anything from a poorly secured spare tyre to the struts that hold the boot or hatch in the raised position.

It sounds as though you either have a problem with the car's electrics or the electronics within the ignition remote. If the car's battery is dead flat, you'll get the symptoms you're reporting, but if the remote has a flat battery (or is faulty in some other way) then you an find yourself in the same boat.

But it could also be an electrical problem other than a flat battery. From memory, some of these Holdens had suspect battery terminals which lacked the grip they should have had and could lead to a loose connection which could produce these symptoms. This would be a good place to start.

But there's another trick you can try. On some Cruze models, there's a process that can over-ride the remote locking and ignition protocols. If the battery in the remote is weak or the remote itself is damaged, this is definitely worth a try. From the driver's seat, locate the small, round plastic bung in the cup-holder in the centre-console. Place the remote key over this hole with the Holden logo facing up. Then try the starter button. With luck, the engine will start and you're away to have the remote fob fixed or replaced. You may find you need to hold the stop/start button for two seconds to get the engine to stop.

Meantime, I have no idea why the actual physical key will not lock the doors from outside. That sounds more like a job for a locksmith.

The 1.8-litre non-turbo and 1.4-litre turbocharged engines in the 2014 Cruze will run happily on 91-octane petrol. The more highly tuned 1.6-litre turbo engine in the SRi, SRi V and Z Series models required a minimum of 95-octane fuel. There's no problem using 95-octane fuel in the engines designed for 91 fuel, but you probably won't gain anything in terms of fuel consumption or performance. The only thing that will happen quicker will be the emptying of your wallet.

There's no problem mixing 91 and 95-octane fuel in the cars designed to run on 91-octane petrol, but the 1.6-litre engine can be damaged by using anything other than a fuel with a minimum octane rating of 95.