The original VW Beetle was amazingly simple to work on (part of its enduring charm, no doubt) but later model Beetles are more complex. However, removing the interior door panel from a new Beetle is not too difficult, provided you know the steps.

The first of those is to remove the small trim panel that forms the interior door-pull or armrest. This can be a bit tricky, but try not to use too much force to avoid breaking the plastic clips that hold it in place. With that removed, you should expose two screws which then also need to be removed.

Next, there are three Torx-headed fasteners that sit along the bottom edge of the plastic trim panel, and they also need to be removed. From there, it’s a matter of gently prising the plastic panel off the door in one piece. Once all the clips have been released, the entire panel can be lifted slightly to free the assembly from the top edge just under the window glass.

If you need to remove the panel completely, you’ll also need to remove the wiring harness for the power windows, locking button, fuel door and the courtesy light (they unclip or prise off with a screwdriver; don’t cut them) and then pull the door release cable from its bracket and unhook it from the interior door handle mechanism.

If you’re going to tackle jobs like this on a car like the VW (and why not?) the best advice is to get hold of a workshop manual that will walk your through tasks like this one with good descriptions and lots of pictures for reference. Such a book will save you lots of money over time.