Chrysler 300C 2010 News

Manufacturers including BMW, Fiat Chrysler Automobiles (FCA), Peugeot and Citroen have issued recalls via the Australian Competition and Consumer Commission (ACCC).

Only a fraction of the 1.2 million cars on Australia roads with airbags that can spray shrapnel have been fixed, new figures show.

The souped-up version that will pace the Iveco Australian MotoGP field this weekend even managed to blow its own lights out during a test run at Calder Park. The roof-mounted light pack couldn't cope with 160km/h and parted company with the big V8 on its first flying lap. A few "technical adjustments" and it should be ready for more serious duty keeping Casey Stoner and Jorge Lorenzo in line on Sunday. The Chrysler Group is the official supplier of vehicles for the Phillip Island event and will have 16 cars on duty - six SRT8s, three Jeep Grand Voyagers, six Grand Cherokees and a Wrangler. The regular SRT8 doesn't need much motivation - its 6.1 litre V8 produces 317kW and 569Nm. The two course cars, though, have been "Mopar-vated", with the Chrysler Group's performance arm catalogue raided to fit more than $7000 in upgrades. The kit includes a Mopar exhaust, cold-air intake, coil overs and front sway bar. Jeep spokesman Dean Bonthorne says the upgrades give the course cars the handling and the sound to head the MotoGP field. "A 300C sounds pretty good anyway but the Mopar exhaust really makes it bark. It's a must-have for the SRT8," he says. A back-to-back run in a regular car and the tricked-up version around Calder Park shows the Mopar model hangs on like a tired two-year-old. It turns in to corners at speeds the standard SRT8 wanted to go straight ahead for and then copes with more throttle coming through the corner. Power isn't hugely up on the standard car but there's enough difference to steadily gain ground on the straights. Turn the traction control off on either model, though, and it doesn't take much effort for the torque to wring the traction out the tyres. MOPAR MOJO The Mopar aftermarket parts sales are huge in the US and have a small but staunch group of supporters Down Under, especially those who import North American vehicles. Items range from interior trim upgrades and weathershields to specialist kits for drag and off-road racing. Chrysler's motorport involvement is limited to Greg Crick driving a Dodge Viper in the Australian GT Championship and Lee Bektash in the Team Mopar drag racer. Bektash watched bemused as the SRT8 ran around Calder Park, then offered some advice on how to experience the ultimate in Mopar-enhanced speed. "There's nothing like this, mate," he says, patting his carbon-fibre and alloy Dodge Avenger pro stock racer. "Zero to 100(km/h) in 0.8 (second), I'll change gears five times the first 4.3 seconds of the (quarter-mile) run and we're pulling more than 300 (km/h) at the end. I don't care what else you do - you can't beat that." Bektash set a 7.03 second pass at this year's Winternationals in Queensland.

And if the predictions are correct, this time the Caliber will have a bit more gunpowder to back up its name. Thanks to the ownership by Fiat, the Chrysler family-owned Dodge Caliber will sit on the Alfa Romeo Giulietta "Wide C" platform and make its appearance at the 2012 Detroit motor show in January. The "Wide C" platform will also provide the underpinnings for the 2013 Alfa SUV and possibly the later Jeep Compass and Patriot. Caliber may get access to the Giulietta's 173kW/340Nm 1.75-lire turbo-petrol engine to create a hot SRT4 version, though most will either retain Chrysler's tired 2.4-litre petrol engine or gradually move into the hi-tech Fiat Group MultiAir engine range.

It's the make-or-break Chrysler 300C that cost the bankrupt corporation more than $1 billion and must work to give Chrysler some much-needed leverage in its global partnership with Fiat.The 300C will eventually also wear Lancia badges in some countries but, as it is revealed today in Detroit, is a new hero for Chrysler.  It looks good and tough, is suitably lightweighted and technologically loaded, and is promised at value prices.The bad news for Australia is that right-hand drive production is a low priority and the new 300C will not land until 2012. Until then, Chrysler Australia has 12-months' stock of the outgoing car.Chrysler has a totally new take on the 300C, which retains some of its gangsta impact but is more modern in everything from the front-end styling to slimmer pillars and windscreens that drop away much more dramatically than the upright glass of the current car.It retains rear-wheel drive but has much-improved suspension and steering, the key engine is the new-generation Pentastar V6 already fitted to the Jeep Grand Cherokee, and pricing in the USA starts as low as $27,995.  Chrysler has done a lot of work on touchy-feeling stuff, from better shaping in the seats to heated-and-cooled seats and cupholders, a 20cm touch-screen infotainment system and a dual-plane sunroof.The new 300C can roll on 20-inch alloys and there is more than two metres of acustic insulation and underbody paneling to smooth airflow and cut drag and fuel economy.The new 300C is displayed at Detroit alongside a revamped Voyager minivan and massively-updated 200 sedan that both reflect the new styling direction from Chrysler's hero car.

The renewal work makes it more elegant and stylish, including a considerable quality tweak in the cabin, but it still has the chunky body and hunkered-down look which has made it a global winner for Chrysler. But don't expect the all-new 300C in Australia any time soon, even though Carparazzi has caught three production-ready cars with its cameras.  A production switch for the new 300C means there will be no right-hand drive cars until 2012. Chrysler Australia has stocked-up on the existing model, with around 400 cars in the pipeline, to carry it through the drought but is not making any promises on the sales start for the new model.  It could have trouble clearing the backlog, based on the latest Carparazzi pictures. They show a car which looks a little shorter than the current 300C with styling taken from the 200C motor show concept car.  The shape of the new-look headlamps is obvious and so is the front fascia, including LED daytime running lamps. Cut-outs in the Chrysler camouflage along the front bumper and mudguard reveal a new sensor that Carparazzi sources say is for a frontal-collision warning system, adaptive cruise control and a blind spot/side assist system. On the sides, the 300C shows new rocker panels, a body crease that sweeps downwards toward the nose and new chrome-capped side mirrors.  The rear doors have also had the black plastic square at the rear swapped out in favor of more glass. In the rear there are LED tail lamps and a bumper with integrated chrome exhaust tips.  There are huge changes inside, with the test cars revealing a solid, leather-stitched dash top similar to the one in the all-new Jeep Grand Cherokee now in production. There is also a large analogue clock for a bit more class and a massive navigation and entertainment screen. Carparazzi sources say there will be lots of LED lighting and a 500- watt Alpine premium audio system.  The new 300C rides on an updated version of Chrysler's LX chassis and comes with the new Pentastar 3.6-litre V6, also fitted to the new Grand Cherokee. There are also 5.7-litre and 6.4-litre Hemi petrol V8s and a diesel engine. Chrysler is aiming to start production at it's Canadian factory in Ontario during the last week of December, 2010, pointing to an official unveiling at the Los Angeles Auto Show in late November.

The American maker is now controlled by Fiat, which is helping to develop a fleet of new vehicles which use its engine and chassis technology for sales from 2012. But that has not stopped Chrysler group rushing new features, extra equipment and better quality into 15 re-worked vehicles for 2010."Our local product team is working closer than ever with the factory to come up with revised or all-new models for our market which we're hoping to see in the near future," says Jerry Stamoulis, spokesman for Chrysler in Australia. As the top performing right-hand drive market for Chrysler, there has been a strong emphasis placed on our market to help lift international sales over the next five years."He says the first of the updated models is already in showrooms and the most important, the all-new Grand Cherokee, will be revealed this year ahead of sales in 2010. "The Grand Cherokee will be the first vehicle in Australia to be available with the all-new Pentastar V6 petrol engine," Stamoulis says. The Jeep Patriot has already had an interior update and similar work will be finished soon on the Dodge Caliber, which comes in the third quarter of this year."Other immediate changes to our line-up are that all Dodge Journey models receive, as standard, active head restraints and the 5.7L Hemi V-8 in the Chrysler 300C receives variable valve timing and an additional 15 kiloWatts, which lifts power to 265kW," Stamoulis says.Apart from the Pentastar V6, various Chrysler models will also get a six-speed, Fiat dual-clutch gearbox. It will be seen first in a re-worked Chrysler Sebring, which also gets updated body styling, a new interior and revised suspension for better ride and handling. The Jeep Wrangler also gets a styling tweak this year, as well as stop-start technology on its diesel engines.

The Chrysler presentation at the show was delivered with an Italian twist. Jim Press, the company's vice-chairman and president, drove onto the stand in . . . a shiny blue Fiat 500. The unusual arrival was intended to highlight the growing tie between Chrysler and Fiat which is the key to the American company's survival. Fiat has taken a stake in the US brand and there is a plan for it to also supply the cost-effective small cars Chrysler has not been able to develop on its own. Press had nothing new to reveal on the Chrysler-Fiat deal but he did - briefly - show the interior of the make-or-break new Chrysler 300C during a video presentation.              

The wholesale restructuring of the US car industry has yielded some little gems of information, some of them from Chrysler.

Now an appropriately styled limited-edition version of the Chrysler 300C 'E490' show car will be in showrooms by the end of the year. Chrysler Group Australia-Pacific, managing director Gerry Jenkins, expects a more modest version of the E490 concept to slip into the range below the 6.1-litre SRT8. The car will be built in-house at the same factory that builds the 300C in Graz, Austria. CARSguide understands one of the biggest stumbling blocks to its development has been the car's rorty exhaust note, which does not meet drive-by noise regulations. However, Jenkins reckons noise is not the issue, saying the company was trying to figure out the car's marketing and positioning in the line-up. Despite this, DaimlerChrysler is pushing ahead with plans for the E490, as well as increasing the accessories available through Chrysler's Mopar performance division. "Certainly there is customer interest in the 6.1-litre HEMI SRT8," Jenkins says. But Jenkins reckons all 300C owners should have the option of personalising their cars. "At the bottom end there is a customer who wants the utility and functionality of the 300C, and somewhere in-between there is a customer who wants the base vehicle but wants to dress it up and personalise it," he says. Jenkins says that personalised 300C sedans and wagons could eventually account for 15 per cent of overall sales of the car. Buyers of the 300C spend about $12,000 dressing up their cars. "A lot of our buyers are already taking their cars to the local car shop and dressing them up," he says. Now Jenkins wants a slice of the action — and the 300C is not the only car in his sights. He says there is huge scope for customised Jeeps and Dodges. He is looking at German company Startech, which sells a range of high-end cosmetic enhancements for the three brands. "They do a little bit of tuning but we're more interested in the cosmetics," Jenkins says. The E490 got its name because of its power rating — 490 horsepower — in pre-metric terms, which equates to 365kW, 48kW more than the standard SRT8. After the jet-black car appeared at the Melbourne Motor Show in March, Chrysler dealers were inundated by interested buyers. The company took a $74,990 SRT8 Touring and added a huge cold-air intake system and modified exhaust. A $6380 Alpine audio system was added, along with XPH 20-inch Cruise alloys, dark window tinting and E490 badging.