Mazda CX-50 Reviews

Mazda has taken more steps away from electric cars, announcing a trial for its biodiesel fuel in Japan, and it could be a game-changer in Australia.Biodiesel is considered a renewable fuel made up of vegetable and used cooking oils, among other organic materials.The trial will take place towards the end of 2026.It will be conducted between the brand’s Hofu, Nishinoura district plant and Nakanoseki finished vehicle yard - a distance of 12km.It will assess fuel efficiency, performance and operational challenges to collect insights with a view to further expansion. The transport trailers used in the trial will operate under conditions equivalent to conventional diesel fuel, which includes maintenance and inspection practices. Mazda is already considering the logistics of a full integration for the fuel system, working with distributors in Japan to develop supply systems and infrastructure. It said it is aiming to achieve carbon neutrality across its range by 2050, with these plans coming at an important time for the brand in Australia.The brand finds itself behind in the electrified vehicle race, which has seen it on the cusp of copping substantial emissions-related fines.It has sought to rectify this with the introduction of the fully-electric Mazda 6e sedan and Mazda CX-6e SUV Down Under.This biodiesel fuel push is further evidence of Mazda's recent venture into non-EV clean emissions alternatives.It recently confirmed the push back of its own electric car plans in favour of hybrids.It is too early to tell whether biodiesel will become an established part of Mazda's lineup, but a trial shows there is potential.Mazda Australia has been contacted for comment to see if there are any plans for biodiesel technology to be introduced and what impact this could have on EVs. Mazda currently offers diesel set-ups in some of its bigger SUVs such as the CX-60, CX-70, CX-80 and CX-90, as well as the BT-50 ute. A new biodiesel-powered BT-50 could give Mazda the edge over rivals such as the Ford Ranger and Toyota HiLux. These diesel powerhouses have experienced challenges in maintaining towing and carrying capacities with cleaner set-ups.The Ford Ranger plug-in hybrid has had a tepid sales response with its lesser payload, while the incoming Hilux EV will only have a driving range of less than 300km

BYD has finished second in Australia's new-car sales race for the second consecutive month, delivering more vehicles than long-standing household names like Ford, Kia, Hyundai and Mazda, and trailing only Toyota in terms of total sales.

Mazda is gearing up to reveal a new-generation version of its popular CX-3 small SUV.The Mazda CX-3 has been one of the Japanese carmaker’s best-selling vehicles in Australia for years now, though it’s firmly reaching the end of its lifecycle.The current model dates all the way back to 2014 and is based on the same platform as the Mazda 2 hatchback and sedan.After 12 years and rumours of discontinuation, Mazda finally confirmed a new CX-3 is on the way soon. The following is a rundown of everything we know so far.When will it be revealed?Mazda has confirmed it will launch the new-generation CX-3 in 2027, initially in Thailand.This means it could be revealed before the end of 2026, though this is unclear.Where will it be produced?This new Mazda CX-3 will be produced in Thailand at the Auto Alliance production facility in Bangkok. It’s co-owned by Mazda and Ford.This production facility already produces the current CX-3, as well as the Mazda 2, for Australia among other Mazda and Ford models.At this stage it’s unclear where Mazda has plans to produce the new CX-3 in other countries around the world. The current CX-3 is also produced in Japan and Mexico.What will be under the bonnet?Mazda hasn’t confirmed exactly what will power the new CX-3 just yet, but it has previously said it’s planning to expand its hybrid offerings.Beyond the CX-50 Hybrid, which uses a Toyota-developed hybrid powertrain, the first in-house-developed hybrid will be the new CX-5. It’s expected the new CX-3 will receive a downsized version of this forthcoming Skyactiv-Z hybrid engine.It’s also likely that a pure petrol powertrain will be offered globally.What will it look like?At this stage Mazda hasn’t given us any official look at what the new CX-3 will look like in production guise yet.However, the Japanese carmaker revealed the Vision X-Compact concept last year at the Tokyo Motor Show and this will likely form as an indicator for the new CX-3’s design.When will it launch in Australia?At this stage Mazda hasn’t given a definitive date of when the new CX-3 will launch in Australia. Given it’s set to launch in Thailand in 2027, this could mean it’ll arrive as soon as next year.

Sedans used to be the staple of many brands in Australia, from the Holden Commodore to the Toyota Camry, but the SUV boom has seen numbers drop off significantly.Ten years ago, in 2016, the Toyota Camry was the fifth best-selling car in Australia, followed by the Commodore sedan in sixth.Fast forward to 2025, Toyota's sedan was the 35th best-selling car in the country, and the Commodore was nowhere to be seen.In 2026 there have been less than 10,000 mid-size sedan sales in Australia so far compared to mid-size SUVs, where almost 100,000 have already been sold. The Camry is still the dominant player in the sedan-only segment, owning nearly 70 per cent, but it looks like China’s next battleground in Australia will be a shot at shaking its dominance.BYD has led the way in this respect and it already has a fully-electric Seal and the just-launched plug-in hybrid Seal 6 on the market.The Seal in particular made some successful inroads into the sedan space. It accounts for the majority of sales outside of the Camry and the Tesla Model 3.The brand is not stopping there, with a larger Seal 7 plug-in hybrid sedan now approved for sale in Australia.MG is another brand focussing on sedans, having already brought in its MG5 a few years ago and the MG7 in 2026, both to middling levels of success so far.It’s not just BYD and MG that are getting in on the sedan act, however, with Geely confirming its Emgrand sedan next year initially in plug-in hybrid form, but possibly also plugless at a later date.Additionally the China-built Tesla Model 3 remains one of the best-selling EVs in the country.There are also 'legacy' brands pinning their hopes on a strong-selling sedan. Mazda recently launched its fully-electric 6e sedan, which is based on the Deepal L07 (not yet sold in Australia) - another China-made model. The 6e is a crucial model for Mazda as it looks to turn around extensive fines incurred under the New Vehicle Efficiency Standard (NVES) due to its predominantly petrol-powered range.The electric 6e saw its initiative pre-order allocation run out very quickly, starting from $49,990 (before on-road costs), highlighting early signs of it achieving its potential.Korean brands Kia and Hyundai have also seen solid sales from its hatch/sedan models, with the K4 and i30 plugging along with a decent amount of registrations, which will be bolstered thanks to the arrival of desirable plugless hybrid versions of both.As usual, price is a key factor where Chinese sedans are providing an enticing alternative, bucking the trend of sedans becoming more expensive as buyers focus on SUVs.While the Mazda 2 is the most affordable sedan on sale at just $28,490, it is the sought-after hybrid tech luring buyers to newer options.The plug-in hybrid Seal 6, for example, starts from $34,990, which is $5000 more affordable than the plug-less hybrid-only Camry, and it is both larger and offers genuine EV range over the barely more affordable Hyundai i30 plugless hybrid (from $33,250). It will no doubt be a similar story for Geely's Emgrand EM-i which is set to launch in 2027.While SUVs remain the biggest seller in Australia, this new wave of affordable and electrified sedans could see the once bustling segment reignited.The question remains whether this array of new options will just fragment a shrinking part of the market, or whether buyers are now looking for something different from the SUV trend.

A little peek behind the CarsGuide curtain. At least once a week the whole team gets together to talk about cars. Well, it’s actually to shape the week’s news lists, but it’s also because, unsurprisingly, we all like to get together to talk about cars.Anyway, a recent one of these catch-ups occurred not long after the Beijing show. Now full disclosure, I wasn’t at what might well be the most important show on the calendar these days (but I was in China at the same time, just somewhere else and with another brand, another sign of the significance of that market).Those who were there tell me much the same thing — not only were they shocked by the number of brands, and the number of vehicles unveiled, they were equally surprised at how many of the legacy brands were displaying Chinese-built models.The vehicles in question wore familiar badging, but were also unfamiliar, in that they were mostly produced in partnership with homegrown Chinese brands, sometimes with the latter doing most of the heavy lifting.Or to paraphrase a colleague in the aforementioned car chat, some don’t really look and feel like they belong to the manufacturer on their badge. They look like they’re Chinese cars in fancy dress, or like Aldi groceries — close, but not quite right.There are now lots of legacy brands drawing down on Chinese partnerships to produce cars. Mazda with its 6e and CX-6e (produced with Changan Automobiles). Nissan with a whole bunch of stuff, including the Frontier Pro (produced with Dongfeng). Honda, which has pushed back its in-house EV ambitions to draw on Chinese-developed models instead. Toyota with the bZ7 (developed with GAC), VW with the 9X (produced with SAIC).And to be fair, I’m yet to see, sit in or drive any of them. Some of these cars are destined for Australia, some aren’t. But it does beg the question – what truly makes a manufacturer’s car their car. Is it the badge? The design? The technology? The dynamics? All of the above?And the bigger question is, can legacy brands really hang on to all of the things that make them special if they’re not just built in China, but built in partnership with Chinese brands?Just last week I wrote that legacy brands partnering with China could be a long-term masterstroke, pairing decades of engineering know-how with China’s high-speed, low-cost manufacturing expertise could give traditional marques a real boost. But then two things happened this week that made me ask another question. The first was a chat with VW Australia, and specifically its very knowledgeable Head of Passenger Cars, who told me that the driving dynamics and engineering of its vehicles are what sets them apart from the often-cheaper Chinese competition. And the second was that CarsGuide car chat.And both got me wondering about the impossible choices being faced by some legacy brands in this more-hostile-than-ever environment. Do nothing and face possible oblivion, or dial up their Chinese partnerships for global markets and risk losing their identity.People paid lots more than me will be tasked with answering that. After all, I just like to chat about cars.

The car landscape has dramatically changed in the past 10 years, with new brands entering the fray and dynamic market conditions shifting buyer wants.Data from 2016 shows how different the cars were captivating the attention of Aussies only a decade ago.The Toyota HiLux led the way, and the Ford Ranger was not far behind, but there was a theme of hatchbacks dominating the other top places. The Toyota Corolla took out second place, while the Hyundai i30 was in third and the Mazda3 sat in fifth. Toyota continued to feature down the list with the Camry sedan, followed by the Australian built Holden Commodore. Further down list, the SUV revolution can be seen to take shape in Australia, starting with the Mazda CX-5. After the Mitsubishi Triton ute in ninth place, there were three SUVs in the Hyundai Tucson, Toyota RAV4 and Mazda CX-3.The best-selling brands in 2016 has changed a lot compared to today. Toyota is still parked up at the top of the charts, but several big names have now been replaced by Chinese carmakers.Mazda and Hyundai occupied second and third, while Holden secured fourth. The Japanese duo of Mitsubishi and Nissan followed next, with Volkswagen being the only European brand in the top 10 after that. Subaru came ninth in the standings, with Kia finishing in 10th, highlighting the brand’s rapid development in Australia. Top selling cars 2016 Top selling brands 2016 In 2021, there were clear changes to the market, but also some consistent themes.The HiLux and Ranger duopoly was in full swing at the top of the standings, with Toyota’s ute still edging Ford’s.Third position showed SUVs were taking over as the RAV4 picked up a huge chunk of sales.There were still examples of a past market, with the i30 and the Toyota Corolla hatches sandwiching the D-Max ute.Further down, SUVs increase their presence further, with the Mazda CX-5, Toyota Prado and MG ZS all making up the top 10, along with the Triton ute. Pure internal combustion power remained a dominant player, with best-sellers such as the RAV4 and Corolla still yet to make its full hybrid transition. Top selling cars 2021 Toyota was still on top as a brand in Australia, while Mazda and Hyundai continued their holding in the top three. Ford was hot on the heels of Hyundai, followed by Kia which had surged up the sales charts in five years to claim a spot in the top five. Mitsubishi and Nissan still occupied high places in the standings as did Volkswagen. The big shift was the appearance of the only Chinese brand in the top 10, in MG. This foreshadowed what we see today where BYD is fast approaching a potential top-two finish in Australia.Subaru picked up a 10th place finish. Top selling brands 2021 Fast forward to 2026, and only three top 10 sellers from 2016 remain. The Ranger and HiLux continue their battle at the top of the standings, but they are in decline.Some unfamiliar names a few years ago are emerging as top choices for Aussie motorists.The Chery Tiggo 4 small SUV has emerged as the best-selling SUV in 2026 to date.Hyundai's Kona is next on the list followed by the D-Max Ute.Mitsubishi's Outlander large SUV is sitting sixth, while the long-awaited launch of the new Toyota RAV4 has resulted in a burst of sales for the popular family car.The Mazda CX-5 remains a regular feature at the top of the sales charts, with GWM's Haval Jolion sitting in ninth currently.Rounding out the top 10 is Ford Everest.This data only represents the first four months of the year, but it does show the general trends of where the market is headed.Top selling cars 2026 (up to April)Top selling brands 2026 (up to April)There are no surprises in the top four best-selling brands so far, with Toyota out in front, followed by Mazda, Kia and Ford.A monster month from BYD has pushed the Chinese giant brand into fifth, overtaking Hyundai. This is despite the brand not having a single car in the top 10 best sellers.The final four highlight the success of Chinese brands in Australia as GWM, Chery and MG are all present, along with Mitsubishi.Former mainstays Nissan, Subaru and Volkswagen are gone, and Holden has closed up shop completely.

Mazda is walking back its electric car plans as it shifts resources to hybrid vehicles.The Japanese brand’s CEO Masahiro Moro said the company will move the launch of its dedicated electric vehicle platform back to 2029, according to Autonews.Instead Mazda will redirect staff to focus on its new range of hybrid vehicles powered by its in-house developed 'Skyactiv-Z' setup, which will debut in the new CX-5 SUV late next year.“Regarding internal man-hours, we are shifting resources back from electric vehicle-related work to internal combustion engines and hybrid vehicles,” said Moro.“When paired with the Skyactiv-Z, our in-house hybrid system creates an excellent combination with an engine that offers exceptional performance and efficiency.”Mazda told CarsGuide during a briefing at its research and development centre in Tokyo in 2025 it will have its own electric car platform, which was to bear fruit by 2028.The company was going to use the next few years to transition to electrification with a focus on battery tech development and procurements before the first dedicated electric car rolls off the production line.Mazda is developing a new way of producing cars that would allow one production line to make internal-combustion engined vehicles, hybrids and electric vehicles depending on demand.This would help it adjust to lulls in EV demand without having to mothball production lines, which has impacted other major makers such as Ford and Volkswagen.Mazda’s partnership with Chinese carmaker Changan has bought it some time to get its own in-house developed vehicles up to speed.The 6e sedan will launch in Australia in the coming months, followed by the CX-6e SUV. Mazda also has plans for at least three more vehicles from the partnership.Moro also announced the company was reducing its EV sales target from as much as 40 per cent of sales to just 15 per cent by 2030.Mazda will instead focus on hybrids, which have also experienced strong growth, especially in the US, which is Mazda’s biggest market by some margin.Mazda fans can expect the new hybrid tech to be fitted to a wide range of vehicles.The company said the hybrid engine will be the core power source for its line-up in the electrification era over the next decade.Mazda hasn’t committed to what models will use the hybrid, but said it could be introduced to any model and it could become mainstream.That means we could see a next-generation CX-30 or Mazda3 hybrid in the coming years, as Mazda’s Chief Financial Officer, Jeff Guyton, said the next-generation small cars were the next priority after the brand finishes its hybrid development.Mazda also confirmed a new CX-3 SUV, which is due in 2027 and could be the next model to go hybrid.

As part of its end-of-year financial results, Mazda has revealed exactly when its next-generation CX-3 will launch.Buried pages deep on the company’s presentation materials, the confirmation shows the CX-3 arriving in 2027. It will be built in Mazda’s Thailand facility and will account for a significant part of the company’s volume aspirations going forward.It will launch in Thailand first in 2027, and Mazda earmarks it as an important part of the brand’s strategy to lean further into its Thai factory as an exporter to both Japan and the South East Asian region.The company didn’t reveal any more details about the incoming CX-3, although it notes a plan to expand its hybrid offering from one to four models (which leaves at least two models to be electrified, after the existing CX-50 and planned hybrid CX-5), although does note that this electrification plan will be focused on its larger vehicles.Expect it to follow a similar design theme to the Vision X-Compact concept the brand displayed at the 2025 Tokyo motor showMazda’s Chief Financial Officer Jeff Guyton told CarsGuide at the 2025 Tokyo show that the next-generation small cars were the next priority after the brand finishes its hybrid development.“It comes to being a modestly sized company, our return on sales isn’t good enough from a business standpoint,” said Guyton.“Our highest priority has been our large platform products, and finally getting those right, and using those to make some money.“Next priority is the CX-5, which will come to your market soon, and soon-ish thereafter is the hybrid version of that car with Mazda’s own hybrid.“Soon after that next priority is smaller architecture cars,” he said.Mazda also recently told CarsGuide the current version of the CX-3 and 2 hatchback would get a stay of execution until 2027.The information in the brand’s EOFY presentation does at least confirm the existence of the next-generation CX-3 and that it won’t be called the CX-20 as previously speculated.Mazda has long said it won’t abandon its “smaller architecture cars” after its all-important and best-selling CX-5 plans are complete.One thing which could put a spanner in the works for the CX-3 replacement in Australia is both our tough new emissions laws and our stringent safety requirements, which often see models designed for the South East Asian market nixed for an Australian launch.The CX-3’s current 2.0-litre petrol engine (110kW/195Nm) mated to a six-speed traditional torque converter automatic transmission won’t be able to continue in Australia, with Mazda already attracting eye-watering penalties under the new emissions scheme.What this could mean is a delay in the CX-3 launching in Australia if it launches in Thailand without a hybrid system initially.To ease its emissions burden going forward, Mazda noted in its EOFY presentation that it would continue to lean on its Chinese-built joint-venture models, like the Mazda 6e and CX-6e which will launch in Australia imminently.With aggressive pricing, both cars are set to compete with not just traditional rivals, but also Chinese newcomer brands in an attempt to put Mazda in the volume space for low-emissions vehicles.This will no doubt help it offset some of the emissions burden the brand will carry along with the incoming CX-5, which will have a carryover 2.5-litre four-cylinder petrol engine in all-wheel drive only.

Mazda may soon be introducing a new model to bridge the gap between two of its most popular SUVs.As reported by Autoblog, the Japanese carmaker filed a trademark application with the United States Patent and Trademark Office (USPTO) earlier this year for the name Mazda CX-40.It’s worth noting that Mazda CX-40 has been trademarked in Australia since 2019.Trademarks are not true indications of whether a carmaker will actually produce a vehicle with that name. It may be just holding it so another carmaker doesn’t take it.We’ve reached out to Mazda Australia for a statement and will update this story once we hear back.If the CX-40 does get produced, it will likely sit between the CX-30 and CX-5 in the line-up.It also won’t be the first time Mazda has produced an SUV with the number ‘4’ in its name.The Japanese carmaker produced a model called the CX-4 from 2016 to 2025 and it was sold exclusively in China.The Mazda CX-4 was based on the same platform as the previous-generation Mazda 3 and first-generation CX-5, but featured a lifted station wagon body style.If this is the case with the potential Mazda CX-40, expect it to adopt swoopy, wagon- or coupe-like body styling.It may even share some similarities with the Mazda Vision X-Coupe concept that was revealed at last year’s Tokyo Motor Show.In addition to the trademark for the name Mazda CX-40, the Japanese carmaker also has current trademarks for the names CX-10 and CX-20 in numerous countries, including Australia.At this stage it’s unclear whether Mazda intends to build these models, however it did reveal the Vision X Compact concept at last year’s Tokyo Motor Show. It previewed what looks like a next-generation Mazda 2 with subtle crossover SUV design cues.Mazda has also committed more investment to its production facility in Thailand, where it will build a new compact SUV, potentially with a hybrid powertrain, as well as electric vehicles (EVs).

Mazda has enjoyed unprecedented success in North America with the CX-50 since its 2022 release, filling a unique space in the Japanese brand’s line-up while attracting a new type of buyer with its chunky, urban-adventure crossover styling.But, despite repeated requests since the beginning of this decade for a version to be sold in Australia, the company headquarters in Hiroshima has refused permission for the mid-size SUV to be re-engineered for us.But why?According to Mazda Australia Managing Director Vinesh Bhindi, the reasons why the CX-50 has not made it here yet has to do with a lack of support from Japan and the United Kingdom.“There isn't a factory that makes it in right-hand drive (RHD),” Bhindi told CarsGuide at the unveiling of the CX-6e SUV electric vehicle in Melbourne.“We still want it, but at this stage, the answer from head office is it's not available.”However, there’s more to it than that.Mazda Motor Corporation General Manager of Global Sales and Marketing Manabu Osuga went deeper, revealing the surprising reason for the lack of desire from other big RHD markets.“RHD is the challenge,” Osuga said. “There's two other key markets, Japan and the UK, and they're not warming to it as hard as Australia. So, that's really the challenge.“The CX-50 is quite big car for both the Japanese market and the European market, especially in terms of the width, which is much wider (than other comparable small-to-medium-sized SUVs).“It's even wider than the CX-5, and is even equivalent to the CX-60 through to the CX-90 (big SUV) sizes. So, because of that, Japan is not raising its hand and the UK is not raising its hand. Only Australia is raising its hand.“So, this generation is quite a tough equation that we need to solve, it's been so successful in the USA.”That said, Osuga is optimistically taking the ‘never-say-never’ approach that one day a future version of the CX-50 will land.“But, this stage, it doesn't stop us asking,” Osuga revealed. “(Developing for RHD requires) a high-level number, but if we can prepare, like, at least 50,000 units to 100,000 units (to be sold globally in RHD), then we can… discuss about it (being imported to Australia).”Bhindi stated that he will continue to support Osuga’s efforts, adding that he will not give up on the CX-50 fight for Australia.“(It’s been a massive hit) not just in the US, but also in Canada and Mexico,” Bhindi said.“And (the CX-50) has been tailored specifically for those markets, but which may not translate to other markets around the world.“We will continue to lobby with Japan and European colleagues to say, ‘let’s have a bigger (RHD SUV)!”Essentially a stretched and rebodied version of the smaller, Mazda 3-based CX-30, the CX-50 has garnered popularity with buyers who might have otherwise considered a Subaru Outback, before the latter grew into a significantly larger SUV than it has traditionally been.This vacating of a proven market segment may open opportunities for the CX-50 to become a more-global proposition in the future.As reported, the CX-50 is made at the joint-venture Mazda and Toyota Manufacturing USA factory in Alabama, USA, next to the Toyota Corolla Cross. The two vehicles are unrelated otherwise, except for sharing Toyota’s series-parallel hybrid system, since Mazda does not as yet produce one.This might change when the expected second-gen CX-50 arrives later this decade, probably in time for Mazda’s highly-anticipated SkyActiv-Z hybrid system that promises to break new ground for efficiency and performance, in keeping with the brand’s reputation for making driver-centric vehicles.Previously, Mazda has also cited limited manufacturing capacity at the JV plant as another reason why it has not bothered with CX-50 RHD.Whether this leads to another production site outside of the USA is unknown at this stage.If this happens, Japan and Thailand (another RHD market) have been mooted in past speculative reports as contenders, along with Mexico and perhaps China.Watch this space.