Holden Problems

Are you having problems with your Holden? Let our team of motoring experts keep you up to date with all of the latest Holden issues & faults. We have gathered all of the most frequently asked questions and problems relating to the Holden in one spot to help you decide if it's a smart buy.

Browse by

Show all

Braking issues with 2004 Holden Cruze
Answered by David Morley · 25 Oct 2024

Any time you have a soft brake pedal, you also have the potential for sudden brake failure. On that basis, you really shouldn’t drive this car anywhere, just in case the entire system decides to fail at the worst possible moment.

Meantime, the noise you’re hearing could be the sound of a leaking brake booster which is losing vacuum and, therefore, braking pressure. But if that was the case, you’d expect the brake pedal to go hard and require more effort to push it, not the other way around.

In many cases, a soft brake pedal is an indication of air in the system. The system should be full of brake fluid, not a combination of fluid and air. That’s because brake fluid is incompressible and, therefore, transfers all the braking force to the brake pads and rotors, stopping the car effectively. Air, on the other hand, is very compressible, and its presence will take away the brakes’ efficiency leading to the soft pedal you’re feeling. But it’s not just a soft pedal; you’ll also experience longer stopping distances and less outright braking power when you need it in an emergency.

Your car may need a brake overhaul, new brake fluid or perhaps just a process called bleeding (where the air is removed from the system). Either way, don’t drive it any farther.

Gear selector problems with a 2008 Holden Astra CDX
Answered by David Morley · 18 Nov 2024

Rather than an internal transmission problem, this is probably a simple case of loose fittings where the selector meets the gearbox or even where the selector pivots inside the centre-console. The moving parts inside this mechanism can wear over time and lead to sloppiness in the shift lever itself. You can remove the centre-console panels and see for yourself if there’s excess play or movement in the connections. The fix might be new bushes or guides, but it shouldn’t be a huge job.

This model Cruze used a toothed rubber timing belt, rather than a timing chain. Holden recommended the belt be changed at 90,000km intervals. It’s not a job to ignore, either, as a snapped timing belt will often turn the engine to junk in an instant.

How can I learn more about the 2001 Holden Calais ute?
Answered by David Morley · 18 Nov 2024

The reason you can’t find much information on a Calais ute is because it never existed. Holden did all sorts of limited edition utes (including things like an Olympic Edition in 2000) but never built a ute with Calais trim or a Calais badge. Which is not to say a keen owner hasn’t modified a ute to live up to the Calais name, but it certainly never came from the Holden factory.

What fuel should I put in a 1964 Holden EH?
Answered by David Morley · 18 Nov 2024

It’s nice to see that some of us are still recycling and keeping old cars on the road. Your question was a hot topic back in the mid-1980s when unleaded petrol (ULP) was being mandated for all new cars. The issue was that older car engines were designed to run on fuel with a small amount of lead in it to help protect (mainly) the valve seats (hence, leaded petrol). The lead also helped prevent detonation inside the engine by raising the petrol’s octane rating. Without this lead, the engine could wear out prematurely, and it was something that owners of existing cars were very worried about.

The ultimate solution for older engine was the installation of what’s called hardened valve seats which, as the name suggests are valve seats in the cylinder head that were physically harder and would cope with the lack of lead. Since your car is older than most people reading this, you may find that it’s on its second, third or even fourth engine and, in that time, may have been fitted with hardened valve seats. Knowing the history of the engine would be very helpful.

But if you don’t have that information, the best advice is to run it on 95-octane fuel (for the octane rating to prevent detonation) as well as a lead-replacement additive to protect the valve seats. This additive can be added to the tank when you fill up, or as a permanent kit fitted under the bonnet that drips a small amount of additive into the engine as it runs. The Valve-Saver brand was a popular make of this type of kit back in the day.

When the time comes to perform work on the cylinder head, think about having the valve seats replaced with hardened ones, at which point you can forget about the lead-replacement additive.

Experiencing shudder in my 2013 Holden Colorado
Answered by David Morley · 05 Nov 2024

That the shudder only occurs in fifth gear is, perhaps, the big clue here. If the problem was an engine mount or drive-shaft or suspension problem, the shudder would appear at those same engine revs or road speed, regardless of what gear the car had selected. So maybe you need to dig a bit deeper into the transmission to see if there’s a problem with the torque converter, the way the converter lock-up is working or even a problem with the gearset itself that offers up fifth gear. This is, of course, if the vehicle is an automatic (which you haven’t disclosed).

If it’s a manual, then fifth gear is the overdrive ratio for that gearbox and some Colorados were fitted with five-speed manuals that had a problem with the thrust washer on fifth gear. This washer could fracture if the vehicle was used for towing heavy loads. When the washer finally failed, the vehicle could jump out of fifth gear and actually lock up the rear wheels. Back in the day, Holden was actually replacing the entire gearbox if the vehicle was one of the affected ones. It would be worth checking with a Holden service centre to see if your vehicle is from that batch.

Radio not working in my 2017 Holden Captiva seven-seat SUV
Answered by David Morley · 18 Nov 2024

What’s probably happened is that the battery of the vehicle has been disconnected as part of the repair process (perhaps there was some welding done, or the workshop disconnected the battery while waiting for parts to arrive). In the process, the radio’s stored stations have been lost.

This is a pretty common problem in most cars that have had their battery disconnected for any length of time, and it requires you to retune the radio to store your favourite stations. If the stereo unit is the one that came with the car from the factory, the owner’s manual should detail how to store your stations, but if the stereo is an aftermarket one, you’ll need to find the instruction sheet, or just wing it until you work out the process.

In some vehicles, you’ll also need to find the radio’s security code and key that in before the unit will even switch on.

This is not an unknown problem with the diesel Captiva. The root of the problem is probably within the fuel system which is over-fuelling the engine. You need to check the fuel-pump pressure as well as make sure all the relevant filters and clean and there are no leaks anywhere in the system. Even then, the actual cause is most often worn out fuel injectors which need to be either reconditioned or replaced. Conventional wisdom suggests that reconditioned injectors will last about half as long as brand new ones before needing attention again. That said, reconditioned injectors are cheaper to buy.

Worn out or dirty injectors have been by far the most common cause of diesel over-fuelling, and the problem is not confined to the Holden Captiva.

Is a 2014 Holden Colorado ute positively or negatively earthed?
Answered by David Morley · 18 Nov 2024

As a modern, conventional design, your Holden is negatively earthed (or, grounded). That is, the negative terminal of the battery is connected to the car’s body and engine to complete the circuit for the electrics to function.

But it wasn’t always this way, and in the USA and particularly Britain, many makes and models were positively earthed. Farm machinery and motorcycles were also often positively earthed. I’ve even heard that Dodge cars from the 1920s and 1930 were positively earthed in Canada, and negatively earthed in the US.

There’s a theory that negative earthing is better for preventing corrosion due to electrolysis, but it seems not all engineers agree on this. Ultimately, negative earth is the conventional setup today. Just make sure you don’t get it wrong as hooking up a battery the wrong way around in a modern car is a fair chance to blow the computers and other electronics to smithereens.

Basically, the light is telling you that there’s something wrong with the car’s driveline and that you need to have it checked out before the problem does any permanent damage. This can be taken care of at a workshop that has the correct scanning tools.

Possible causes are numerous, but can include a dud sensor, a bad earth, wiring problems, damaged exhaust or any one of about a thousand engine or transmission glitches. Don’t bother trying to guess the reason, have the car electronically scanned and home in on the actual problem that way.

Disclaimer: You acknowledge and agree that all answers are provided as a general guide only and should not be relied upon as bespoke advice. Carsguide is not liable for the accuracy of any information provided in the answers.
Have a new question for the CarsGuide team?
More than 9,000 questions asked and answered.
Complete guide to Holden
Complete guide to Holden CarsGuide Logo
Reviews, price, specs and more