A highlight of the E-Expert’s design is its conspicuously low published tare (unladen) weight of only 2052kg, which is considerably lighter than not only its LDV eDeliver 7 LWB Low Roof rival at 2365kg but also the segment-leading diesel HiAce (in LWB Auto Barn-Door spec) at 2245kg.
This figure is largely the result of weight-saving chassis technology, given that its diesel Expert equivalent’s tare weight is an athletic 1698kg. As a result, given the E-Expert’s 3053kg GVM, it has a substantial 1001kg payload rating, so it’s a genuine one-tonner.
It’s also rated to tow up to 1000kg of braked trailer, but given Peugeot does not publish a GCM (or how much it can legally carry and tow at the same time) we can't confirm how much payload it can carry while towing its maximum trailer weight.
The cargo bay, which with the standard bulkhead/cargo barrier has a competitive 6.1 cubic metres of load volume, is accessed through sliding doors on each side with 935mm openings or from the rear through symmetrical barn-doors with 180-degree opening to enhance forklift and loading dock access.
The cargo bay offers 2780mm of floor length and 1628mm width, which combined with 1258mm between the rear wheel-housings means it can carry two standard Aussie pallets, or up to three Euro pallets, secured with a choice of eight load-anchorage points.
The cargo bay floor length partially extends to more than 4.0 metres by opening the load-through flap at the lower left-hand side of the bulkhead and raising the outer passenger seat-base into its vertical storage position.
This allows long lengths of timber, copper/PVC pipe, carpet/lino rolls etc to slide through and be carried internally. There’s also an additional load-anchorage point in the passenger footwell. Overall, this is a practical design feature.
The bulkhead window is protected by a sturdy mesh guard, the cargo bay doors and walls are lined to mid-height and internal lighting is provided front and rear.
A tough liner to protect the load floor from scrapes and dents is not included as standard equipment, but is available as an accessory.
The cabin can seat up to three occupants with a combination of a driver’s bucket seat and two-passenger bench seat. All seats are trimmed in two-tone ‘Mica Grey' fabric and equipped with full lap-sash seatbelts.
Although this cabin design offers wide door access and good comfort for the driver and outer passenger, the centre passenger is compromised by the large central-dash protrusion that houses the gear-selection and drive-mode controls.
The only option for those seated in the middle is to position both legs on the passenger side of this protrusion, which ensures their feet intrude into the outer passenger footwell. So, trips with two passengers should only be short ones.
Another criticism is the lack of hinge detents or struts to hold the rear barn-doors open in their 180-degree positions, given that a gust of wind when loading/unloading can slam them shut with potential injury for the operator (we reckon lock-open devices should be mandatory for all vans equipped with barn-doors).
The cabin includes two tiers of storage in each front door, comprising a slender shelf at mid-height for small items and a large-bottle holder and big storage bin at the base for larger items.
On top of the dash-pad are a small-bottle/cupholder on each side and a large clamshell-lidded compartment in the centre. There’s also a glove box with another open storage compartment below, while the centre console offers a smartphone cradle.
The centre seat’s base-cushion, which is hinged at the front, can be tilted forward to reveal a deep compartment below that’s lined with insulating polystyrene foam to keep small items of food and/or drink hot or cold.
The centre seat’s backrest can also fold forward and flat to reveal a mobile office space, with a small desk that can be rotated to provide a comfortable working angle. It also has a shallow tray for holding pens etc and an elastic strap to hold documents in place.
.jpg){kind=small}
