Are you having problems with your 1999 Ford Falcon? Let our team of motoring experts keep you up to date with all of the latest 1999 Ford Falcon issues & faults. We have gathered all of the most frequently asked questions and problems relating to the 1999 Ford Falcon in one spot to help you decide if it's a smart buy.
Show all
UNFORTUNATELY, there isn't a modern gas-injection system available for your model, so it will be an old throttle-valve type that has been used for years in taxis and private cars. It works well, gives little trouble, and will deliver the economy you want. It's best to talk to a reputable installer and get his advice and, if possible, to talk to other owners who have fitted the same system to AU Falcons.
WATER leaks can be hard to trace and there are many potential causes. I know of one BA Falcon with a leak that even Ford's engineers couldn't trace. It was so bad the company was prepared to take the car back and exchange it for another one. That was a new car, not one like yours that's done a few ks. The windscreen is a possibility, particularly if the car has had a windscreen replaced, so look there. Sometimes the windscreen flange can rust, causing a leak. Strip out the carpets and other bits and pieces that can easily be removed and drive it through a car wash or hose it down while watching for the leak, That might allow you to trace it back to the source.
THE recall, applying to AUI and AUII Falcons built between June 1, 1998, and May 22, 2001, relates to a steering rack mounting stud. Ford says over-tightening of the stud could cause the stud to loosen. In extreme cases, the stud may fail and affect steering. Two cases of loose studs and one case of a missing stud have been reported, but Ford is recalling all cars to take precautionary action. Vehicles built in the period outlined used a Loctite threadlocking compound, which could be degraded if the stud was over-tightened. Vehicles built after May 22, 2001, are not affected.
ALL are suitable for work, but it could come down to the type of work you do. None will work as hard as a Japanese one-tonner. If you don't need to carry heavy loads, the Falcon may well do the job. The XH will carry more than the XD and XF in its one-tonne guise, so that may be worth a look. XD and XF Falcons are getting long in the tooth and will be well past their use-by date. In utes you need to look for damage to the body. The condition of the inner tray is a giveaway to its previous life. Also, check early Falcon utes for rust.
THE place to start is the ignition system and that's where your mechanics have started, but they perhaps haven't gone far enough. Backfiring is common and experienced mechanics replace the spark plugs, spark plug leads and even ignition coil packs if they are fitted. If the problem is with the coil pack, replacing the leads will improve the problem, but won't solve it. The coil will simply kill the new leads within days and the problem will come back. Replace all three components in the ignition system. If that doesn't fix it, look at the mixer because backfire can damage it.
I DON'T believe we ever said the AU I is a bad car. What it does have is poor resale value, which makes it a poor buy, and we have said that. We have also criticised its styling, but that's a matter of opinion. You're entitled to yours.
ANY new model will be more expensive than the last. That's the way it works. As for reliability and maintenance, I think they are very similar. The Mazda is a well-built car, as is the Camry, and both drive well. I would go for the Mazda6 over the Camry for a better driving experience.