Articles by Tom White

IM, the luxury arm of MG’s parent company SAIC Motor, has revealed details of its flagship LS9 Hyper large SUV.The nearly five-and-a-half meter long luxury hybrid SUV pairs a 1.5-litre turbocharged four-cylinder engine with, not two, but three electric motors in a range-extender set-up (where the engine has no connection to the wheels but is used purely as a generator for the battery). It has enormous power figures with the front motor producing 165kW and the two rear motors producing 195kW each, while the engine is capable of producing 114kW to power the battery. The plug-in hybrid LS9 is equipped with a 65.9kWh Nickel-Manganese-Cobalt (NMC) battery pack, which grants it up to 308km of pure electric driving range, according to the more lenient CLTC testing procedure.It is also equipped with a fully independent four-wheel electric steering system with the wheels able to turn a total 24 degrees, bringing its turning radius down to just 4.95 meters, less than the total length of the vehicle.It is also equipped with dual-chamber adjustable-height air suspension, which has 150mm of travel, and features a new regenerative braking system that can allow for 100 per cent energy recovery.It features the brand’s latest design language with LED strips front and rear, as well as between 20 and 22-inch wheels. Inside, it scores a dash-spanning tri-screen layout, which measures a total of 27.1-inches, with a separate passenger screen measuring 15.6-inches on its own.The massive IM9 is a three-row SUV, although it is offered in China as a six-seater rather than the more prevalent seven-seat layout usually seen in Australia.The seats can fold fully flat, and IM claims the LS9 has an 86 per cent usable interior space.The details on the LS9 Hyper model come after the brand recently revealed the smaller LS8, which has a similar approach to its styling and performance.Chinese automakers are pushing into the space usually occupied by the Range Rover or Range Rover Sport, Volvo XC90, BMW X7 and Mercedes-Benz GLS.IM’s LS8 and LS9 will face off in China against a wide array of rivals, including the Leapmotor D16, Denza’s D9, Zeekr’s 8X, as well as an upcoming flagship SUV from GWM.The explosion of activity in this large luxury SUV space has also caused BYD to delay its incoming Tang 9 flagship in the same category as it seeks to improve the model to stay ahead of its competitors.SAIC’s luxury IM arm is sold via MG in Australia and it currently offers two models, the LS5 and LS6 electric sedan and SUV.

Chery’s Rely commercial division has revealed pricing and specifications for its electric dual-cab ute in China, the R08 EV.

Genesis, Hyundai’s luxury arm, has revealed a range of off-road concept vehicles, including the bespoke X Skorpio off-road coupe.The brand showed off its range of concepts in the UAE as part of what it called a “glimpse into Genesis’ next decade”, with each car leaning into off-road prowess. The models shown include the GV70 Outdoors concept, featuring a pumped ride height, off-road wheels and tyres, with a roof platform and rally lights, and the GV60 Outdoors concept, which adorns the EV with a set of tracks rather than wheels and similar upgrades to the GV70.The X Skorpio is billed as the brand’s first “extreme off-road vehicle”, which is “purpose built to conquer harsh terrain with cutting-edge performance and luxurious design”.The model is named as such drawing inspiration from the black scorpion, which it says is “known for its resilience and ability to thrive in harsh environments”.It sports a tubular frame, roll cage and other “components sourced directly from off-road endurance racing specialists”, and while it is designed with the performance of Dakar-style trophy trucks in mind, it also features a focus on interior comfort and ergonomics.It also builds on the brand’s previous Magma GT concept, featuring a V8 engine. In the case of the X Skorpio, Genesis says it produces 820kW/1152Nm, although deeper details on this yet-to-be-made-for-production engine are yet to be revealed.It also features 19-inch wheels with 40-inch tyres and motorsport-grade Brembo brakes. The body is built from fiberglass, carbon fibre and kevlar.The latest range of concepts build on a clear shift toward the lucrative 4x4 market by Genesis, which is no doubt eying the success of the Toyota LandCruiser range, as well as its Lexus GX and LX spin-offs.Many Chinese brands are also making inroads into the performance 4x4 space, with GWM finding success in markets like Australia and the Middle East.The new concepts build on other recent examples of Genesis’ future model previews, like the X Gran Equator concept which previews a Lexus-GX rivalling large off-road SUV.In an investor briefing in late 2025, the brand confirmed it was plotting a production version of not only the X Gran Equator, but also a ute under the Hyundai brand.The production car based on the X Gran Equator was said to feature a new range-extender hybrid powertrain, which will be placed in other Genesis models to headline the brand’s emissions-friendly European presence.The focus of the brand’s incoming range of cars it wants by 2030 was very much focused on the European and US markets, which could see the Australian market wait longer than usual to see these new models from Hyundai’s luxury arm.Genesis is also plotting an expansion on its Magma sub-brand for performance versions of its existing range.In other Genesis news, the brand recently released an array of images from a design concept it worked on for a Ford F150-sized pick-up truck. The project was ultimately shelved, with Chief Design Officer for the brand Luc Donckerwolke explaining to CarsGuide that it simply wasn’t the right time for the luxury arm to be launching such a product.This doesn’t rule it out for the future. Meanwhile, the luxury brand’s Hyundai parent has been increasing its commentary around its highly anticipated first ute model, most recently hinting it may share the frame from its Kia Tasman sister product, but will instead debut with “new technology” rather than the Tasman’s 2.2-litre diesel.

BYD’s Sealion 6 will undergo a behind the scenes change in Australia, which could alter the future direction of BYD products for our market.Following the news of the end of production for the top-selling BYD Sealion 6 in China, the brand’s local division has confirmed to CarsGuide not only will the model live on, but it will swap production to the brand’s Thai factory.The “eventual” change will be seamless and imperceptible to Aussie buyers, and ongoing supply of the popular plug-in hybrid will not be affected, according to a BYD Australia representative.“BYD vehicles are built to the same exacting quality standards irrespective of the production location, so it doesn’t matter if the vehicles originate from China or Thailand,” the representative said. “Nor would we anticipate any impact to shipping and logistics costs.”While the shift may be imperceptible to buyers, it represents an interesting move for the Chinese brand in opening the door to potentially more Thai-built cars in the future.BYD opened its new Thai factory in 2024, which has been building the Atto 3, Dolphin, Seal and now the Sealion 6, with a capacity of 150,000 units a year. While the factory serves as a strategic facility for right-hand drive markets in the region, it also started exporting left-hand drive vehicles to Europe in 2025.This is because vehicles built in Thailand can dodge some tariffs placed on Chinese-built vehicles in Europe.The massive export boon, plus a big push in Thailand to electrify its vehicle fleet, has attracted multiple Chinese manufacturers to its shores.BYD joins GWM, which took over the Holden plant in the same province, as well as familiar giants SAIC Motor, Changan and GAC.GWM has also begun to source cars for the Australian market from its Thai facility, kicking off with the updated Ora electric hatchback.Thailand continues to be the country of origin for the majority of utes sold in Australia, including the Ford Ranger, Toyota HiLux, Isuzu D-Max and Mitsubishi Triton. It was once a strong export location for passenger cars from brands such as Honda, it has since fallen to the wayside as Australia’s safety and emissions standards further diverge from our South East Asian neighbours.More demand for electric vehicles and a higher specification level offered in Chinese cars has again made Thailand relevant as a point of origin for cars sold in our country.The majority of BYDs will continue to be sourced from China for the time being, but it will be interesting to see whether the shift to Thai production for one of its best-selling products will influence its local line-up in the future.BYD has an ambitious goal to be a top-three automaker in Australia by the end of 2026, and to achieve that goal it will aggressively expand on its line-up over the next 12 months.The brand has just launched its Atto 1 city hatch and Atto 2 small SUV both as fully electrics, and will soon offer the Sealion 5 as a price-leading plug-in hybrid mid-size SUV to sit below the Sealion 6. It will also top-out its local range with the Sealion 8 three-row plug-in hybrid SUV. The brand has also flagged an expansion of its smash-hit Shark 6 plug-in ute range, which currently only has a single variant. It has earmarked well-received upgrades from the related Denza B5 — such as differential locks, which are currently a glaring omission from the Shark 6’s equipment list.Other officially unannounced models in the works include the Seal 6 sedan and wagon pair, both will serve as plug-in hybrid alternatives to the fully electric Seal sedan, which has been on sale for some time. The pair appeared in regulatory approval documents earlier in January. These approval documents usually precede a launch by a few months.All form part of BYD’s plan to attack as many market segments as possible to challenge some of the most popular automakers in Australia. To achieve a podium finish, the brand will need to nearly double its sales tally from 2025, and unseat popular brands Hyundai, Kia and Mazda.

The Renault/Nissan alliance will lean deeper into their ties in China for ultra-rapid vehicle development, according to a new report from industry source Automotive News.While Nissan has been open about its need to lean into its Chinese joint-ventures for rapid global vehicle development off the back of a range of successful models in China, its alliance partner Renault has started the process of decoupling from its Chinese ventures.However, the French giant maintains a development centre in Shanghai, established in 2019, from which it leverages the Chinese market’s speed and competitiveness to develop next-gen electric cars and hybrids.According to Automotive News the development cycle of these new models is just 16 months from concept to production, as part of a push by Renault to be more competitive with Chinese brands making rapid inroads into Europe.Brands like GWM, BYD, and Chery have ultra-rapid design cycles that often shorten generational changes to well below the usual seven-to-10 year mark that traditional automakers often stick to, with updates and facelifts regularly rolled out.The first models to benefit from the knowhow of the Shanghai development centre are a range of new city cars based on the upcoming Renault Twingo E-Tech. The electrified city car will spawn an equivalent Nissan (the next-generation Micra) and a low-cost spin-off for the Dacia brand.It will mean the Twingo is designed in France, built in Slovenia, with spin-offs developed in Shanghai.The model is the company’s most affordable mainstream electric car, with the equivalent of an AU$33,446 starting price in Europe. In the same vein as a BYD Atto 1, the Twingo is equipped with a 60kW electric motor, features 263km of driving range and has a relatively impressive 360-litre boot.Part of Renault’s mission with the retro Twingo was to reduce weight for an electric car, thereby having a lower rate of energy consumption and requiring smaller batteries which form a bit part of the cost. To that end, the city hatch has an LFP battery with just 27.5kWh capacity, which is smaller than some plug-in hybrids.The battery is so small the car doesn't even come with DC charging capability, but a 50kW DC port can be optionally equipped, reducing charge time to just 30 minutes. It can also optionally be equipped with a vehicle-to-load (V2L) function, allowing a power output of up to 3700W for external devices.It is unclear whether Renault’s Australian importer has designs on the Twingo, although it has previously stated it plans for Renault to be primarily an electric car brand going forward, earmarking re-badged Dacia models (like the recently-launched Duster) as the future of its combustion cars.Meanwhile, Renault has effectively exited the Chinese domestic market, wrapping up its joint-venture with Dongfeng. It has various strategic interests in Asia, including a partnership with Geely on a spin-off combustion engine business, Horse Powertrain, and it has re-configured its South Korean manufacturing base.Formerly Renault Samsung Motors, the Korean factory is now also a joint-venture with Geely, which produces new Renault models for the global market, as well as vehicles under the Geely umbrella, like the Polestar 4.Horse Powertrain, meanwhile, will build engines in Europe and China for Renault and Geely models, as well as for Dacia, Nissan, Mercedes-Benz, Volvo, Lynk & Co, Proton and even Mitsubishi.French brands have struggled to compete in Australia's new-car landscape that's being re-defined by aggressive Chinese carmakers.Renault sales were down 17.8 per cent by the end of 2025 compared with 2024, while arch-rival Peugeot fared even worse, down 28.8 per cent in the same period.Citroen, meanwhile, exited Australia in November 2024 after 102 years following a long period of slow sales.

Tesla’s Cybercab has been spotted testing in the USA as the company forges ahead with its plans to produce a fleet of driverless vehicles rather than expand on its range of popular EVs.The Cybercab was spotted on the streets of Chicago where it can be seen with a few design changes since its controversial debut in 2025.The test car features wing mirrors for a start, but also forges ahead with the concept’s lack of a rear window, meaning it relies on a camera for its rear vision, in much the same was as the Polestar 4.The car builds on the stark and nearly featureless body panels Tesla first showed on the Cybertruck, and then rolled out to the updated Model Y in 2025. The spotted prototype maintains the fully covered wheels.Tesla has previously confirmed the Cybercab can be fitted with a steering wheel and pedals even if it wants the design to be entirely driverless, adding fuel to rumors the Cybercab is a re-purposed take on the ‘affordable’ sub-Model 3 car Musk long said the brand was working on.According to a report in 2025, the so-called ‘Model 2’ was personally cancelled by Musk to make way for the driverless Cybercab. Musk then denied it was cancelled, which alarmed employees and shareholders who knew the company had already severed supply contracts relating to the Model 2.Another reason for Tesla going all-in on autonomous vehicles rather than produce a more affordable Model 2 is because of the surging competition in the affordable EV space.It was claimed the cheapest Tesla would be a US$25,000 (AU$36,743) pitch to buyers, although in many parts of the world there are now even more affordable EVs in this space.In this price range just in Australia for example, there is now the option of the Leapmotor C10 (from $45,888), Geely EX5 (from $40,990), and BYD Atto 3 (from $39,990), all of which are in the more popular family SUV size-bracket.Instead, as a short-term solution, Tesla is in the process of rolling-out more affordable base Standard versions of the Model 3 and Model Y in global markets, featuring cloth seats, solid roof panels rather than a panoramic sunroof, and with some stripped-out interior tech like the rear climate and entertainment screen, as well as ambient lighting and electric steering column adjust.It is unclear whether the entry-level versions of the Model 3 or Model Y will debut in Australia. It also remains unclear if our market will ever see the rest of the brands catalogue, like the Cybertruck or Cybercab.Tesla has had a relatively strong innings in 2025 off the back of the arrival of its much-anticipated Model Y update. The updated SUV remained the top-selling electric car in Australia in 2026, selling 22,239 units. It is significantly more than the next most popular model, the BYD Sealion 7, which moved 13,410 units in the same period.The Model 3 also remains a popular option in third place, moving 6617 units over the year, but is tumbling down in raw numbers (-61.3 per cent year-on-year) despite a well-received update launching in early 2024.

MG’s luxury division, IM Motors, has revealed another ultra-luxury large SUV, which will join its range in the coming year.The LS8 is a large three-row SUV, which will sit above the IM6 that is currently sold in Australia, but below the flagship LS9 revealed in 2025.Information recently filed with the Chinese Ministry of Industry and Information Technology (MIIT), we know the LS8 is more than five meters long, exactly two meters wide, and 1817mm tall with a 3060mm wheelbase.The LS8 will be a range-extender plug-in hybrid, combining a 1.5-litre turbocharged petrol engine acting independently of electric motors on each axle. IM models currently sold in Australia are electric-only.The MIIT information shows IM is planning two massive battery sizes, either 52.1kWh or 65.9kWh, for an electric driving range between 268km and 335km according to the more lenient CLTC testing cycle.The new exterior pictures show a boxy large SUV design, which is distinct from the more curvy design language on the IM5 and IM6 sold in Australia.It shares many similarities to other upcoming luxury large SUVs from rival brands, like the Leapmotor D16 and Denza N9 from BYD’s luxury arm, suggesting strong demand for luxury hybrid SUVs in the Chinese domestic market.It features a contemporary light strip and Kia-style vertical LED fittings at each corner in the front, and a matching light strip across the rear. It has a raked roofiline with contrasting black panels in very similar style as popularised by cars like the Range Rover Sport and Velar.The interior is yet to be revealed, but is expected to mirror the designs seen in the LS9No Chinese brand has yet launched one of these luxury large hybrids in Australia.The closest option currently comes from BYD’s Denza, which offers the more off-road focused Denza B5 that is roughly Prado-sized, or the Denza B8 flagship that is more LandCruiser 300-sized.IM Motors has previously told CarsGuide that every new model developed by the luxury arm are aimed at global markets, so the LS8 and LS9 could very much be on the cards for an Australian launch.The brand’s previous CEO Peter Ciao said the company is planning a strong line-up for 2026, with IM Motors forming a part of that planning, so expect an expansion on the range soon.

We're running Hyundai's tiny new electric city car as a long-termer. Here are our first impressions.

Toyota is aiming to have its range of vehicles be at least 30 per cent built from recycled materials by 2030, as new EU regulations are expected to target more than just tailpipe emissions in the next decade.Toyota is focusing on recycled metals, such as re-forged steel used from crushed or deconstructed vehicles as part of an extensive ‘circular economy’ push and to reduce waste.A strategy document shows various initiatives Toyota will be undertaking, which includes up to 25 per cent recycled plastics used in new vehicles by 2030, a declaration on the content of recycled metals (including steel, aluminium and magnesium) for its vehicles by 2028, and future designs will be easier to deconstruct when they reach end of life.The brand flags 19 parts including catalytic converters, bumpers, EV batteries and motors to be designed to be easily removed from scrap vehicles and deconstructed future range of vehicles.Part of this push is to comply with existing and incoming European regulations on materials use and recycling for cars. Regulations around end-of-life products require 25 per cent of plastics used in cars to be from recycled materials, while battery regulations require “recycled usage rate” targets for key materials like lithium, cobalt, nickel and lead.In total, Toyota is “aiming to achieve a recycled material rate in its vehicles sold in Japan and Europe of 30 per cent or more by 2030”. The 30 per cent figure is not by number of parts but by total weight of the vehicle.The report notes there are easier gains to be made toward this goal in the recycling of steel in order to reduce new raw materials used, plastics, meanwhile, are much more difficult to process due to the differences in materials used, and volatile components within them which make them expensive to re-process into new materials.Thanks to this new initiative, Toyota’s Gosei plastics manufacturing subsidiary has developed materials with a 50 per cent recycled plastic content and performance equivalent to newly-made plastics, which it says is a world-first. Examples of this material being used are in the glovebox and grille-backing material in the new Euro-market Camry.Other new Toyotas using recycled plastics include the incoming new-generation RAV4 and the Crown Sport SUV.As the majority of Toyota models sold in Australia are built in Japan, we can expect at least some of its more popular vehicles the RAV4, Corolla, and Camry to be made of this 30 per cent-by-weight recycled materials.While the goals seem to apply at a global level for the brand, it is unclear at this stage whether the targets for vehicles built in Europe and Japan will also apply to vehicles built in Thailand, like the ever-popular HiLux ute.Other brands will have to have similar targets for materials recycling in order to continue to sell vehicles in Europe, with regulators also expected to come after other non-exhaust particulate matter, like tyre waste and brake dust.As a result, many manufacturers are experimenting with re-introducing drum brakes, which capture waste, or using brake systems that heavily rely on regenerative braking via electric motors with back-up friction brakes contained in the motor assembly (inboard brakes), rather than discs on the wheel hub.One of the leaders in the sustainability space, Polestar, issues a sustainability report claiming its new Polestar 4 has the lowest lifecycle emissions in its entire range, despite it wielding a massive 100kWh battery pack. The brand says this is largely due to advances made in using recycled aluminium and steel in the car’s frame, as well as renewable energy power used in its factory and by suppliers.Nissan is also aiming for a 30 per cent recycled material target, while BMW is aiming for a 50 per cent recycled material content by 2030.

In what seems to be an obvious end-game as part of its team-up with Leapmotor, Stellantis could be set to lean on its Chinese partner for hybrid technology to bolster its other brands in Europe.Ultimately, according to a new report from Autocar, this will mean the range extender hybrid tech from Leapmotor’s C10 and B10 will be deployed in at least Peugeots and Fiats.Autocar quotes Leapmotor’s international CEO Tianshu Xin as saying the company is “exploring the possibilities” to use range extender hybrid tech in other Stellantis brands, as part of the group finding “synergies by using each other's technology.”The international boss also earmarked future platform sharing as the direction in which the partnership was moving.Stelllantis, which was born from a merger between the America-focused Fiat Chrysler and Euro-focused PSA Group, has had a disparate array of products built for an array of different markets on a range of platforms which didn’t start out with a lot of commonality between them.The brands under the group include Alfa Romeo, Chrysler, Citroen, Dodge, DS, Fiat, Jeep, Maserati, Opel, Peugeot, Ram and Vauxhall.While this initially made it challenging for the group, it has gradually begun to rationalize its platforms into a handful to be used across its global range. For passenger cars this includes the 'STLA' small, medium, and large architecture, 4x4s and utes ride on the SLTA Frame platform.Leapmotor, which is 19.99 per cent owned by Stellantis, uses a separate 'LEAP' architecture for its vehicles, developed separately from Stellantis in China. Leapmotor is now also building cars in EuropeMr Xin’s comments on future platform sharing seems to indicate there could be future cars from European brands on the LEAP platform, or future Leapmotor cars underpinned by an STLA platform.Either way, Leapmotor’s range-extender hybrid technology solves a problem for Stellantis in rolling out a consistent range of hybrids in emissions-sensitive markets, or potentially even for the American market where EVs are floundering thanks to the removal of incentives.For Australia, it could lead to a range of appealing range-extender hybrids wearing a wider array of badges, whether they are Fiats, Peugeots or even Jeeps.Jeep in particular is embattled in Australia, down a whopping 33.3 per cent until the end of 2025, moving just 1585 units for the year. Its range of products has been cut down significantly, with the brand discontinuing the new-generation (and significantly more expensive) Grand Cherokee after a slow sales run.This strips its range down to just the Wrangler off-roader and its related Gladiator ute, as well as the Euro-sourced Avenger electric compact SUV and outgoing previous-generation Compass mid-sizer.Peugeot is also embattled in Australia, having taken a 28.8 per cent sales hit over the course of 2025. It moved just 1350 units for the year, as it faces stiff competition from rivals new and old.Even Leapmotor’s fledgling effort in the Australian market has struggled to find traction. The brand offered the mid-size C10 in both EV and range-extender hybrid forms, and yet managed to sell 644 new vehicles over the course of the year.In comparison, its most direct rival, Geely and its EX-5 and Starray EM-i hybrid spin-off, moved over 5000 units in the same period.Next for Leapmotor’s Australian efforts is its B10 small SUV, initially in electric and later hybrid form. Internationally, the brand has also debuted the C16 large SUV and A10 crossover in China, as well as the B05 Golf-sized hatchback in Europe.