Ask The Guide

If the camera is physically working and giving you an image – albeit a fuzzy one – the first thing to try is to physically clean the lens of the camera. Road grime, water, dust and even spider webs can all block the camera’s lens and make for a blurry image. A soft, clean cloth and some clean water might be enough to restore clarity.

If not, then you may have a problem with moisture actually inside the lens. This will require the camera to be disassembled to some degree to clean the inside of the lens.

You say the battery is okay, and it’s possible for it to show 12 volts on a multi-meter, yet still be ready to be replaced. The trick is to load test the battery. That is, measure the voltage across the terminals while the battery is trying to crank the engine. Sometimes, a battery that seems okay with no load will turn to jelly once you apply the starter-motor load.

Cars (and batteries) don’t like sitting around doing nothing. The car’s alarm and even things like the clock in the dashboard will all continue to run, slowly draining the battery. A drained battery, if sat long enough, will often not recover even if you try to recharge it. Beyond that, an auto electrician will be your best first stop.

This is definitely not the sort of information car makers publish. Instinct suggests the headliner should, indeed, fit through one of the door openings, as that’s how it would be fitted on the production line. Try a front door opening first with the front seat slid all the way back and the backrest laid right down.

The other option would be to politely ask a motor trimmer how they manage this job.

It sounds like you’re stressing every part of your SsangYong if you’re managing to make it overheat and the suspension sag. Are you sure the caravan is within the legally allowed towing mass for the vehicle?

You could fit stiffer rear coil springs, but before you do that, check that you have the caravan loaded properly and that it’s not placing too much weight on the tow-ball. Generally, this weight should be a maximum of 10 per cent of the van’s total mass. Any more than that and you wind up with a very dangerous rig that could be dangerous to you and other road users.

For the record, the 2022 Rexton has a towing limit of 3500kg, but the trade considers this to be a pretty big ask for the 2.2-litre engine which could be the cause of your overheating problems.

Cars are often less than perfect and problems can show up once they are released on to a particular market with particular conditions. But every new make and model that hits the road and is eligible for registration has to pass a range of tests and certifications before the government will allow that to happen. So your question is really one for government, but the reality is that in many cases, nobody can see these problems coming.

Meanwhile, while I won’t speak for every `information’ source on the internet, I can say without fear of contradiction that no road tester or writer for Carsguide accepts payments from car importers for their opinion. Social media influencers may be a different matter, but I promise you that anything published on Carsguide is the truth and in no way influenced by the car maker or importer. We now live in an age where you need to be very careful where you source your information, but Cargsuide is one source you can trust. It’s something the writers (my colleagues) are very proud of.

There’s a variety of ways a turbocharged engine can lose boost. You might have a problem with the intercooler or even something simple like a dirty air filter. Don’t rule out a fuel supply problem which is causing the computer to reduce boost to account for a lack of fuel.

But one thing that has been noted in these cars is a cracked or broken boost pipe. If that happens, the boost will be lost to the atmosphere before it can get to the engine. Black smoke from the exhaust is a common accompaniment to this problem.

If the car is still running well and there’s no signs of oil burning, then the oil you’ve been using so far would appear to be the right one. Thicker oil is usually only used if the engine is starting to show signs of wear and is leaking or burning oil.

While that mileage sounds a lot, provided the servicing has been carried out promptly, it’s amazing how far a modern, quality engine like the Honda’s will go without problems.

There are plenty of things that can cause this, but being a petrol engine with no turbocharger, it shouldn’t be too tricky to diagnose. Any time an engine runs well when warm but struggles when cold, suspicions are drawn to the fuel/air mixture. A warm engine needs a very different mixture to a cold engine, so modern engines have sensors that monitor the engine temperature, the air/fuel ratio and how well that mixture is burning. If any of those sensors are not telling the computer everything it needs to know, poor running can be the result.

But it would also be worth looking at the air intake side of things. An air or vacuum leak into the intake manifold can also cause rough running and hard starting. The engine’s stepper motor (which controls the idle speed) could also be at fault, but could also be the victim of one of those non-working sensors.

It sounds very much like the ignition barrel has failed and is jamming the key inside. But it could be something else, too. Modern cars often have an interlock between the gear selector and the ignition key. If the car isn’t in Park, it won’t release the key as a means of making sure you leave the car in a safe state (where it can’t roll away). If any of the micro-switches and sensors that control this function have failed (or are in the process of failing) you might find that to be the cause.

If the engine is running well, but the car won’t move in gear when you take your foot off the clutch, it’s very likely that your clutch has failed. The clutch is responsible for transferring power from the engine to the gearbox and, if it wears out, it can no longer do so and the vehicle will just sit there and not move even when you take your foot off the clutch pedal and the car is in gear.

You noted that the car had previously seemed to lose power, but this was more likely to be the start of the clutch failing and not transferring all the power it should have been. Eventually, though, the failure became total and no power is getting through to the gearbox (and, therefore, the wheels).

A new clutch is the likely fix but make sure to check the flywheel for damage and wear while the car is apart.