Ask The Guide

Turn the smart key upside down, then depress the notch near the top of the key and pull the back half off.

Remove the manual key from the holder, then prise the middle section of the smart key loose and the battery is underneath. To program a Ford Fusion smart key you need to close all the car doors, then open the driver's door, and press unlock on the driver's side door. Turn the ignition from OFF to RUN eight times in a row, finishing the 8th time on RUN. You need to do this step within 10 seconds of pressing unlock on the driver's door, and need to cycle the key within 10 seconds each time. When you have correctly entered programming mode the door locks will begin to lock and unlock as part of that cycle. Within 10 seconds of entering program mode, press any key on the smart key to be programmed.

Turn the key to OFF, the door locks will activate again to signal the end of programming.

The quoted average retail price is $4000-$6000, but the car you are talking about would attract a premium due to its low kays and condition, so you could easily double that.

The first step to getting a fast Fusion is to buy the Sport version, as the 242kW turbocharged V6 engine and great handling means the performance model actually lives up to its name.

If that doesn't whet your appetite then unfortunately your only other real option is to grab one of the NASCAR racing Fusions being discarded ahead of the 2019 season as Ford moves the stock car racing teams across to the Mustang

Normally it should be about halfway on the scale, but it could go higher than that and not be a problem as long as it doesn’t get close to the top mark.

You should use the park brake when leaving the car parked, and always engage the gear before releasing the brake to drive away. If it continues to shudder after doing this, have the gearbox checked, it could a problem with the clutches, or the hill-hold might need adjusting, or it might be fixed by a transmission oil change.

That is excessive. Try an independent mechanic or brake service outlet and you should be able to have it done for much less.

To change the Ford Edge key battery, push the button on the smart key and remove the manual key. Then, using a flat-head screwdriver, prise the two halves of the battery apart by twisting the screwdriver in the end of the smart key where the manual key was removed from. Once the key is apart, replace the battery with a fresh #CR2450 battery and clip the key back together.

The American mid-sized Ford Fusion sedan was introduced for the 2006 model year, with production started on 1 August, 2005 in Sonora, Mexico. The second-generation model, built on Ford's CD4-platform, is still built in Sonora, Mexico and - until 2016 - was also built in Flat Rock, Michigan, USA.

If it is a diesel I would have the particulate filter checked, it might require regenerating.

Debuting at the 2018 New York Auto Show, Ford released details of the 2019-spec Fusion models. The pick of these are the Titanium (replacing the formerly top-of-the-range Platinum) or the V6 Sport model for those wanting some pep.