2006 Mitsubishi Grandis Pricing and Specs
The Mitsubishi Grandis 2006 is available in Regular Unleaded Petrol.
|Mitsubishi Grandis Models||SPECS||PRICE|
|(base)||2.4LULPRegular Unleaded Petrol4 SP AUTO4 speed automatic||$7,000 – 10,890|
|LS||2.4LULPRegular Unleaded Petrol4 SP AUTO4 speed automatic||$6,500 – 10,010|
|Luxury||2.4LULPRegular Unleaded Petrol4 SP AUTO4 speed automatic||$7,300 – 11,330|
|VR-X||2.4LULPRegular Unleaded Petrol4 SP AUTO4 speed automatic||$7,000 – 10,780|
Mitsubishi Grandis 2006 FAQs
Check out real-world situations relating to the Mitsubishi here, particularly what our experts have to say about them.
How do I turn the service reminder off in my 2016 Mitsubishi ASX?
This is a pretty common type of question these days. Once cars are out of warranty (and often before that time) many owners elect to use an independent workshop for their servicing rather than a dealership. But some non-dealership workshops don’t always know the little tips and tricks including how to switch off the service reminder after the scheduled service has been performed.
But here’s something you can try at home which should cancel the service light on your ASX. Turn the car’s ignition off. Now press the info button (down low on the dashboard near the steering column) until you see a small spanner icon appear in the info panel on the dashboard. Now hold down the info button until the little spanner symbol starts flashing. Once it’s flashing, release the info button again and the word `clear’ should pop up next to the spanner icon. With `clear’ displayed, press the info button one more time and you should be done. Now start the engine to make sure the service reminder light has gone out. If none of that works, a Mitsubishi dealership should be able to switch off the light for you.Show more
Does the Mitsubishi ASX 2018 have a timing belt or chain?
Both the petrol and diesel versions of the 2018 ASX used a timing chain rather than a toother rubber timing belt. That means both engines’ timing chains should be good for the life of the engine, although in practice that hasn’t always been the case and some engines do, in fact, need new timing chains if wear develops in the chain or its tensioners. Neither Mitsubishi engine has thus far demonstrated that trait, however, and it’s far less common if the engine has been serviced correctly.
The task of the timing chain or timing belt is exactly the same: They take drive from the engine’s crankshaft to the camshaft and, in the process, keep all the moving parts in harmony. Many car makers moved away from a timing chain to the rubber, toothed drive belt as a way of simplifying engine design and driving down the cost of each engine. The rubber timing belt is also quieter in its operation and is also less prone to stretching (as a timing chain can) so the camshaft stays in perfect synch with the rest of the engine’s rotating parts. It’s a simpler design because it doesn’t need to be tensioned via oil pressure from the engine as many timing chain systems are.
The timing chain, meanwhile, is preferred by some manufacturers because it should last the lifetime of the engine and never need replacement. This isn’t always the case, however, and some engine designs from a variety of manufacturers suffer problems in this regard. But, in a properly maintained engine of sound design, the timing chain should never need attention, while the rubber timing belt generally requires periodic replacement, typically between 60,000 and 120,000km depending on the manufacturer.Show more
What should I do if my 2011 Mitsubishi Triton makes a grinding noise when changing gears?
Mitsubishi’s manual gearboxes from around this time (and earlier) were some of the noisiest around. But usually it wasn’t anything to be concerned about. Bearing rumble and some clutch bearing noise were pretty much par for the course, but your problem sounds more like it’s associated with the gearbox’s synchromesh rings. These rings are designed to allow the gearbox to slip between ratios smoothly and silently, and any crunching noises during shifts can often be traced to worn synchromesh parts.
The good news is you won’t harm the transmission by continuing to drive it, particularly if you’re careful and take your time with the shifts you know are most likely to create a crunch. If you can live with that, fine. If not, the gearbox will need to be removed from the car and rebuilt. That will be neither cheap nor simple.Show more