2014 Colorado LTZ RG makes a grinding noise after brake replacement

The trick to a diagnosis here might be to find out what rotational bits and pieces are involved. To do that, you need to work out whether the noise is wheel-speed related, driveshaft-related or engine and transmission-related. The driveshaft spins fastest, followed by the driveshafts and finally the wheels, axles and brakes. So that’s probably the key to it.

Even something as simple as a bent or loose brake shield can cause a rattle, squeak or grinding noise, and some owners have gone so far as to strap GoPro cameras under the car and take it for a drive to see what’s going on. A mechanical workshop will probably be a bit more scientific, but the basics of troubleshooting remain the same.

As far as the driveline locking for a moment, you could be looking at a related problem or a completely separate issue. It’s probably wise to make sure the transfer case isn’t suddenly shifting into neutral or low-range on its own for that split-second, as that could cause driveline chaos. But a sticking brake caliper or faulty ABS module could potentially also cause the same sensation.

Some cars cycle their ABS systems when you first start up and take off, and this can lead to a metallic noise for a second or two and a slight buzz through the car. It can be intermittent, too. Are you sure that’s not what you’re hearing?