Remove the T20 bolt in the door grab/pull enclosure (not the handle), then use trim removal levers to pop the centre section of the door panel off. Undo the two 10mm bolts on the underside of the door skin, and the T20 bolt behind the door handle cover. Pry the speaker grille off and unbolt the speaker, with two bolts and two long T20 bolts to remove the speaker, then remove the two 10mm bolts at the front of the door card holding the door panel to the door skin. Pop the mirror cover off, then remove two 10mm bolts from the centre section of the door panel. Remove the three Allen key bolts holding the window regulator to the door and the door panel can be removed by lifting up, and then disconnecting the door handle from behind the door panel.