Browse over 9,000 car reviews

Holden Commodore oil burning

The 3.6-litre SIDI engine on my 2011 VE Commodore Series 2 SV6 seems to be using a lot of oil. It's only done 24,705 km and was last serviced in August at 15,215 km when everything checked out, but when I read that another reader reported problems I decided I would check. The car has no visible leaks and it was then parked on a level surface and the engine allowed to cool for 20 minutes. There has been no warning on the dash, but checking the dipstick I found it dry and not a bit of oil, so I put in three litres and the dipstick registered that it then had a proper level of oil. What is your advice in regards to this?

We have had a few reports of oil burning with the Holden V6, and it would seem yours is another one. To start with run a check of the consumption by topping it up and then checking it weekly for a period, say 5000 km, and measure how much oil has been used. If it is high, as you suspect, take your findings to your dealer and ask for some action to be taken to fix it.

Disclaimer: You acknowledge and agree that all answers are provided as a general guide only and should not be relied upon as bespoke advice. Carsguide is not liable for the accuracy of any information provided in the answers.

Comments

Have a new question for the CarsGuide team?
More than 9,000 questions asked and answered.
Complete guide to Holden Commodore 2011
Complete guide to Holden Commodore 2011 CarsGuide Logo
Reviews, price, specs and more