Mitsubishi ASX Review, For Sale, Colours, Interior, Specs & News

Mitsubishi ASX Q&As

Check out real-world situations relating to the Mitsubishi ASX here, particularly what our experts have to say about them.

• Is it normal for the back of my 2022 Mitsubishi ASX to sway and bounce on bumpy roads?

  It all depends on what you call bouncing and how you define bumpy country roads. But one thing’s for sure, if the car really is leaping about more than it should, it has nothing to do with the fact that the engine is in the front. Don’t accept that sort of nonsense from anybody; a modern car should be balanced to drive and that’s that.

  There has to be a degree of movement over bumps – that’s why cars have suspension in the first place - otherwise, they’d be very uncomfortable to ride in. But excess movement means there’s either a problem with the suspension itself (bushes, ball-joints or maybe even the springs themselves) or the shock absorbers aren’t doing their job by controlling and arresting the normal movement over bumps.

  Again, though, it’s important to set parameters for what’s normal and what’s not. The parlous state of this nation’s country roads at the moment means it’s possible to encounter some truly momentous bumps and potholes, many of which are enough to damage a car’s suspension, not just test its limits. Meantime, start with a check of the shock absorbers and work from there. If they’re worn out or tired, they can certainly allow more movement than there should be.

  Show more Show less
• Having trouble selecting reverse in a 2023 Mitsubishi ASX

  Intermittent problems like this one can be very annoying as they rarely emerge when a mechanic is looking at them. However, you need to have the Mitsubishi dealership mechanic with you for a test drive as you try to make the problem occur, however long that takes. Perhaps you could video the car's behaviour next time it happens and show the workshop that way.

  Common causes for a manual car to refuse to select a gear are usually down to a worn, maladjusted or damaged clutch or a poorly adjusted gear linkage. If there's a horrible graunching noise when this happens, I'd suspect the clutch, if not, it could easily be a simple matter of adjusting the selectors. Either way, this shouldn't amount to rocket science in 2024.

  Just be sure not to take no for an answer; if the car has a problem, it's under warranty and it's Mitsubishi's problem, not yours. 

  Show more Show less
• How do I turn the service reminder off in my 2016 Mitsubishi ASX?

  This is a pretty common type of question these days. Once cars are out of warranty (and often before that time) many owners elect to use an independent workshop for their servicing rather than a dealership. But some non-dealership workshops don’t always know the little tips and tricks including how to switch off the service reminder after the scheduled service has been performed.

  But here’s something you can try at home which should cancel the service light on your ASX. Turn the car’s ignition off. Now press the info button (down low on the dashboard near the steering column) until you see a small spanner icon appear in the info panel on the dashboard. Now hold down the info button until the little spanner symbol starts flashing. Once it’s flashing, release the info button again and the word `clear’ should pop up next to the spanner icon. With `clear’ displayed, press the info button one more time and you should be done. Now start the engine to make sure the service reminder light has gone out. If none of that works, a Mitsubishi dealership should be able to switch off the light for you.

   

  Show more Show less
• Does the Mitsubishi ASX 2018 have a timing belt or chain?

  Both the petrol and diesel versions of the 2018 ASX used a timing chain rather than a toother rubber timing belt. That means both engines’ timing chains should be good for the life of the engine, although in practice that hasn’t always been the case and some engines do, in fact, need new timing chains if wear develops in the chain or its tensioners. Neither Mitsubishi engine has thus far demonstrated that trait, however, and it’s far less common if the engine has been serviced correctly.

  The task of the timing chain or timing belt is exactly the same: They take drive from the engine’s crankshaft to the camshaft and, in the process, keep all the moving parts in harmony. Many car makers moved away from a timing chain to the rubber, toothed drive belt as a way of simplifying engine design and driving down the cost of each engine. The rubber timing belt is also quieter in its operation and is also less prone to stretching (as a timing chain can) so the camshaft stays in perfect synch with the rest of the engine’s rotating parts. It’s a simpler design because it doesn’t need to be tensioned via oil pressure from the engine as many timing chain systems are.

  The timing chain, meanwhile, is preferred by some manufacturers because it should last the lifetime of the engine and never need replacement. This isn’t always the case, however, and some engine designs from a variety of manufacturers suffer problems in this regard. But, in a properly maintained engine of sound design, the timing chain should never need attention, while the rubber timing belt generally requires periodic replacement, typically between 60,000 and 120,000km depending on the manufacturer.

  Show more Show less